Study on the Characteristics on the Heater-Triggered Switch for the Charging of a Superconducting Magnet

초전도자석 충전을 위한 BSCCO 히터트리거 스위치의 특성 연구

  • 김영식 (연세대학교 전기전자공학과) ;
  • 배덕권 (연세대학교 전기전자공학과) ;
  • 안민철 (연세대학교 전기전자공학과) ;
  • 윤용수 (안산공과대학 전기과) ;
  • 고태국 (연세대학교 전기전자공학과)
  • Published : 2003.02.01

Abstract

Characteristics of a heater-triggered switch has been analyzed through the simulations and experiments. It was for the charging of Bi-2223 double pancake load with 1.7 mH and two heaters were used. The timing of the sequential control and the heating current with two heaters are important factors to generate pumping-current. The thermal analysis of the switch considering the heater input and time was carried out. Based on the analysis just mentioned. heater-triggered switch was fabricated. Characteristic analysis was carried out through two modes having different sequential timing controls. Maximum pumping-current reached 18 A and the pumping rate was 113 mA/s at that time.

Keywords