Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference (한국전기전자재료학회:학술대회논문집)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지

Effect of thermo-mechanical treatment on fabrication of Ag tapes for YBCO coated conductor

차세대 선재 기판용 Ag 테이프의 제조공정에서 가공 열처리가 집합조직에 미치는 영향

  • 이남진 (한국전기연구원 초전도응용연구그룹) ;
  • 오상수 (한국전기연구원 초전도응용연구그룹) ;
  • 박찬 (한국전기연구원 초전도응용연구그룹) ;
  • 송규정 (한국전기연구원 초전도응용연구그룹) ;
  • 하동우 (한국전기연구원 초전도응용연구그룹) ;
  • 권영길 (한국전기연구원 초전도응용연구그룹) ;
  • 류강식 (한국전기연구원 프론티어사업단)
  • Published : 2002.04.25
Download PDF
⟨ Previous Next ⟩

Abstract

The aim of this paper is to investigate the influence of various deformation ratio on texture of Ag tapes that can be used as a RE-$Ba_2Cu_3O_{7-{\delta}}$ coated conductor tapes without any buffer layer. We fabricated as-rolled Ag substrate with various deformation ratio per step. Thickness and total deformation ratio of Ag tapes were $100{\mu}m$ and >98%, respectively. And as-rolled Ag substrate was annealed at $750^{\circ}C$ for 30min. The as-rolled and recrystallization textures were measured using x-ray pole figures and orientation distribution function (ODF) analysis. With the increase of rolling ratio from 5 to 20%, deformation texture are changed from {1l0}<311> to {1l0}<112>, {032}<100>, {051}<211>. After recrystallization by annealing, main texture was observed to {013}<100> under present condition.

Keywords