Abstract
Ti films were deposited onto $100{\times}100$ mm alumina substrates using dc magnetron sputtering under the following conditions; substrate temperature of R.T. ${\sim}400^{\circ}C$, annealing temperature of $100{\sim}400^{\circ}C$ and sputtering gas pressure of $1.3{\sim}3.0{\times}10^{-2}$ Torr. And the films were examined by X-ray diffraction analysis (XRD), scanning electron microscopy(SEM) and 4-point measurement system. The best electrical and structural properties obtained by substrate temperature of ${\sim}200^{\circ}C$, target-substrate distance of ~14 cm and sputtering pressure of $1.3{\sim}1.7{\times}10^{-2}$ Torr. Also at that condition the most excellent adhesion was observed.
