Proceedings of the Acoustical Society of Korea Conference (한국음향학회:학술대회논문집)
- spring
- /
- Pages.209-212
- /
- 2002
A study on the Wear Estimation of End Mill Using Sound Frequency Analysis
음향주파수 분석에 의한 엔드밀의 마모상태 추정에 관한 연구
- Cho Taik Dong (Department of Mechanical Design Engineering, Chungnam National University) ;
- Lee Chang hee ;
- Sohn Jang Young
- Published : 2002.07.01
Abstract
The wear process of end mill is a so complicated process that a more reliable technique is required for the monitoring and controling the tool life and its performance. This research presents a new tool wear monitoring method based on the sound signal generated on the machining. The experiment carried out continuous-side-milling for 4 cases using the high-speed steel slot drill under wet condition. The sound pressure was measured at 0.5m from the cutting zone by a dynamic microphone, and was analyzed at frequency domain. The tooth passing frequency appears as a harmonics form, and end mill wear is related with the first harmonic. It can be concluded from the result that the tool wear is correlate with the intensity of the measured sound at tooth passing frequency estimation of end mill wear using sound is possible through frequency analysis at tooth passing frequency under the given circumstances.
Keywords