A Study on the Development of an Electronic Ballast for 70W Ceramic Discharge Metal Halide Lamps

70W 세라믹 방전관 메탈할라이드 램프용 전자식 안정기 개발에 관한 연구

  • 김일권 (한국해양대학교 전기공학과) ;
  • 길경석 (한국해양대학교 전기공학과) ;
  • 이성근 (한국해양대학교 전기공학과) ;
  • 김진모 (태양전자(주) 기술연구소)
  • Published : 2002.05.01

Abstract

This paper describes a design and fabrication of an electronic ballast for 70[W]ceramic discharge metal halide lamps. The proposed ballast is composed of a rectifier, an active PFC, a half-bridge inverter, a LC resonant circuit and a controller. The design also includes a specially designed time circuit which provides reignition of the lamp. Running frequency of the ballast is set at 45[KHz]to avoid acoustic-resonance and flicker. from the test results, input power factor and efficiency of the ballast were estimated 91[%] and 97.7[%], respectively.

본 논문은 70[W]급 세라믹 방전관 메탈할라이드 램프용 전자식 안정기의 설계와 제자에 대하여 기술하였다. 제안한 안정기는 정류기, 능동성 역률개선회로, 하프브리지 인버터, LC 공진회로 및 제어회로로 구성되며, 램프의 재점등에 필요한 타이머 기능을 추가하였다. 점등시 램프에는 음향공명현상과 플리커 현상을 피하기 위하여 45[KHz]의 고주파 전압이 인가되도록 설계하였다. 실험결과로부터 역률과 효율은 각각 91[%], 97.7[%]로 평가되었다.

Keywords