덕트 내 음원 특성 측정을 위한 다중부하법의 부하 선택에 관한 연구

On the selection of loads in the multi-load method for measuring in-duct source characteristics

  • 장승호 (한국과학기술원 기계공학과 소음진동제어연구센터) ;
  • 이정권 (한국과학기술원 기계공학과 소음진동제어연구센터)
  • 발행 : 2000.11.16

초록

One-port acoustic characteristics of an in-duct source can be measured by the multi-load method using an overdetermined set of open pipes with different lengths as applied loads. The input data. viz. load pressure and load impedance, are usually contaminated by measurement error in the actual measurements, which result in errors in the calculated source parameters. In this paper, the effects of the errors in the input data on the results have been studied numerically, varying the number of loads and their impedances in order to determine what combination of the loads will yield the best result. An error analysis is applied to each case of possible loads, which consist of open pipes. It is noted that, frequently, only a set of open pipes is used when applying the multi-load method to the intake or exhaust sides of internal combustion engines. A set of pipe lengths which cause the calculated results to be least sensitive to the input data error can be found when using open pipe loads. The present work is intended to produce guidelines for preparing an appropriate load set in order to obtain accurate source properties of fluid machines.

키워드