A Study on the Development of Automatic Drawing System for Pump
펌프의 자동설계 시스템 개발에 관한 연구
- Kim, Ill-Soo ;
- Park, Chang-Eun ;
- Jeong, Young-Jae ;
- Song, Chang-Jae ;
- Kim, Hak-Hyoung ;
- Park, Ju-Seog
- 김일수 (목포대학교 기계공학과) ;
- 박창언 (목포대학교 기계공학과) ;
- 정영재 (목포기능대학교) ;
- 송창재 (목포기능대학교) ;
- 김학형 (목포기능대학교) ;
- 박주석 (목포기능대학교)
- Published : 1999.12.01
Abstract
The biggest challenge facing today manufacturing industry is better quality and high productivity. From an economic point of view, productivity is the most important parameter, as high productivity will reduce the cost. However, the customers of day are not only cost concerned, but also quality conscious. So high accuracy levels should also be achieved in the manufacturing process. This paper reports the development of a automatic design system based on AutoCAD program. 1'his work is composed of three section that are design of top down menu, impeller and casing for pump programed by AutoLISP language and runned Windows system. The developed system ultimately generates the design for a pump through AutoCAD program. In the design of the pump, it needs about 23 hours with an expert, but this system can be only 80 seconds without an expert.
Keywords
- Automated Drafting;
- CAE(Computer Aided Engineering);
- CAM(Computer Aided Manufacturing);
- FEM(Finite Element Method)
- 자동제도;