Abstract
We have investigated Pt and RuO$_2$as a bottom electrode for a device application of PZT thin film. The bottom electrodes were prepared by using an RF magnetron sputtering method. We studied some of the property influencing factors such as substrate temperature, gas flow rate, and RF power. An oxygen partial pressure from 0 to 50% was investigated. The results show that only Ru metal was grown without supp1ying any O$_2$gas. Both Ru and RuO$_2$phases were formed for O$_2$partial pressure between 10∼40%. A Pure RuO$_2$ phase was obtained with O$_2$partial pressure of 50%. A substrate temperature from room temperature to 400$^{\circ}C$ was investigated with XRD for the film crystallinity examination. The substrate temperature influenced the surface morphology and the resistivity of Pt and RuO$_2$as well as the film crystal structure. From the various considerations, we recommend the substrate temperature of 300$^{\circ}C$ for the bottom electrode growth. Because PZT film growth on top of bottom electrode requires a temperature process higher than 500$^{\circ}C$, bottom electrode properties were investigated as a function of post anneal temperature. As post anneal temperature was increased, the resistivity of Pt and RuO$_2$was decreased. However, almost no change was observed in resistivity for an anneal temperature higher than 700$^{\circ}C$. From the studies on resistivity and surface morphology, we recommend a post anneal temperature less than 600$^{\circ}C$.
