대한전기학회:학술대회논문집 (Proceedings of the KIEE Conference)
- 대한전기학회 1996년도 하계학술대회 논문집 A
- /
- Pages.190-192
- /
- 1996
초전도 여자 코일을 이용한 초전도 Power Supply 제작 및 동작 특성 해석
The Manufacture and Operational Characteristics Analysis of a Superconducting Power Supply by using Superconducting Excitation Coils
- 배준한 (연세대학교 전기공학과) ;
- 오윤상 (연세대학교 전기공학과) ;
- 송명곤 (연세대학교 전기공학과) ;
- 지창섭 (연세대학교 전기공학과) ;
- 김호민 (연세대학교 전기공학과) ;
- 고태국 (연세대학교 전기공학과)
- Bae, Joon-Han (Dept. of Electrical Engineering, Yonsei University) ;
- Oh, Yun-Sang (Dept. of Electrical Engineering, Yonsei University) ;
- Song, Myung-Kon (Dept. of Electrical Engineering, Yonsei University) ;
- Ji, Chang-Seop (Dept. of Electrical Engineering, Yonsei University) ;
- Kim, Ho-Min (Dept. of Electrical Engineering, Yonsei University) ;
- Ko, Tae-Kuk (Dept. of Electrical Engineering, Yonsei University)
- 발행 : 1996.07.22
초록
This paper is a study on the rotating type of superconducting power supply(R.S.P.S.) with superconducting excitation coils. In this paper, a new idea of excitation coil is introduced to control the pole-flux in air gap. We manufactured the R.S.P.S. by using superconducting excitation coils and measured the charging current of superconducting load with respect to rotational speeds and excitational current. Through this experiment, 425A of maximum current was obtained a few minutes. It turned out that the charging rate of load current is proportional to rotational speeds and excitational current. Furthermore, it is found that it's possible to generate the charge current of thousands of amperes by using wires of larger critical current.
키워드