Compensation of errors caused by resonance vibration of measurement system in impact force measurement

  • Usui, Y. (Mechanical Engineering Laboratory) ;
  • Miyazawa, S. (Mechanical Engineering Laboratory) ;
  • Sawai, N. (Mechanical Engineering Laboratory)
  • Published : 1994.10.01

Abstract

When a force impulse acting on a massive and plex object is measured with a dynamometer, be resonant vibration of the measurement system often leads to serious inaccuracies. A more accurate measurement is obtained when the transfer function ,of the object-dynamometer system is used to compensate for the error in the dynamometer's output signal. The natural frequency and the damping coefficient of the transfer function are estimated by analyzing the waveform of the free damped vibration period after the loading of the force has ended. The residue of the system is determined such that the compensated force spectrum becomes smooth within a neighborhood of the natural frequency. The effectiveness of this signal processing method is experimentally tested on a hammer impulse, under the assumption that the hammer's high resonant frequency accurately models the problems encountered in force impact measurement. The compensation method is used to derive a improved estimate of the hammer impulse.

Keywords