INTRODUCTION OF DATELLITE COMMUNICATION SYSTEM TEST LANGUNGE

For the effective use of satellite communication transponder, tests for the payload system such as IOT(In-Orbit Test), RPM(Routine Payload Monitoring), CSM(Communicatios System Monitoring), and REV(Remote Earth-Station Verification) have to be conducted. Those tests are used in order to verify the condition and generic design of the satellite, to provide a database for operational calculations, and to maintain the quality of communication services. As the satellite communication system gets with wider expansion with higher complexity of operation, tests for the communication system also need more complex operation that usesophisticated computer-controlled measuring system. For and C language based measurement functions, which uses GPIB protocol and SCPI commands. But SICL requires knowledge of BASIC and C language as well as GPIB and SCPL system. This paper introduces a new language called CALSTEP-Control and Access Language for the Systems of Test Equipment and Payload. This language is designed for the operator to perform the tests for the satellite communication system without any special knowledge that is mentioned above. This language has very limited number of commands which are to be used to control the payload system and test equipments to perform IOT and CSM, and those commands are very readable and easy to understand, so an operator without any knowledge of BASIC and C programming language, or SICL and SCPI command can use it.