• 제목, 요약, 키워드: structral strength

검색결과 5건 처리시간 0.026초

고강도 콘크리트를 사용한 R/C 평면골조의 동적응답해석 (Dynamic Response Analysis of R/C Frame Structures Using High-Strength Concrete)

  • 장극관;황정현;방세용
    • 한국지진공학회:학술대회논문집
    • /
    • /
    • pp.278-286
    • /
    • 2001
  • The purpose of this paper is to suggest an analytical technique for time history analysis of R/C frame structure using high-strength concrete under seismic loading. Current researches in hysteretic model of structral elements using high-strength concrete are not enough. It is the cause of error that apply hysteretic model of element using normal-strength concrete to the inelastic analysis of high-strength concrete R/C frame structures. In this paper time history analysis using IDARC and DRAIN programs was performed for a 2-bay, 20-story R/C frame structures. Particularly nonlinear dynamic analysis was performed by IDARC program that was applied hysteretic model of structural element using high-strength concrete. centro earthquake 1940 NS waves was used in the analysis and its peak ground accelerations are changed to be 0.12g, 0.25g

  • PDF

초고속 원심분리기 복합재 로터의 해석 및 최적설계 (Optimal Design of Ultracentrifuge Composite Rotor by Structral Analysis)

  • 박종권;김영호;하성규
    • 한국정밀공학회지
    • /
    • v.15 no.1
    • /
    • pp.130-136
    • /
    • 1998
  • A procedure of stress and strength analysis has been proposed for the centrifuge rotor of composite materials of quasi-isotropic laminates. The goal in this study is to maximize the allowable rotating speed, that is, to minimize maximum strength ratio with the given path length by changing the geometric parameter-outer radius and ply angles in quasi-isotropic laminates. Optimum values of the geometric parameter-outer radius and ply angles are obtained by multilevel optimization. All the geometric dimensions and stresses are normalized such that the result can be extended to a general case. Two dimensional analysis at each cross section with an elliptic tube hole subjected to internal hydrostatic pressures by samples as well as the centrifugal body forces has been performed along the height to calculate the stress distribution with the plane stress assumption, and Tsai-Wu failure criterion is used to calculate the strength ratio. The maximum allowable rotating speed can be increased by changing the radii of the outer surface along the height with the maximum strength ratio under the unit value : The optimal number of ply angles maximizing the allowable rotating speed in quasi-isotropic laminates is found to be the half number of tube hole, and the optimal laminate rotation angle is the half of $[{\pi}/m]$. A $[{\pi}/3]$ laminate, for instance, is stronger than a $[{\pi}/4]$ laminate for the centrifuge rotor of 6 tube hole number even though they have the same stiffness.

  • PDF

우수저류조 유닛의 하중강도에 대한 모의실험 분석 (Simulation on Loading Strength of Rainwater Storage Tank Unit)

  • 이상우;남동군;최종문
    • 한국안전학회지
    • /
    • v.28 no.4
    • /
    • pp.107-113
    • /
    • 2013
  • The design of rainwater storage system unit to manufacture its reservoir tank was tried, the simulation to predict of their structural strength was carried out. Rainwater storage system unit should be easy to their machinability, transport and assemble. Especially, their structure was able to secure the water storage space, withstand loads and easily response to pollution. Considering these various requirements, they have to Doria-pillar structure of the Roman architectural style because these designs could disperse the loads which are applied to them. Therefore, the six kinds of models possible were proposed. Several boundary conditions were given to each model. Their structural strength was predicted through the simulation on their stress and the displacement distribution to constant load. From the evaluated data, the structure which has a large pillar in the central of unit and four small pillars each corner was the best.

가축성 강재 지보의 강도특성에 관한 연구 (A Study on Strength Characteristics of Yieldable Steel Arch Supports)

  • 김종우
    • 터널과지하공간
    • /
    • v.8 no.4
    • /
    • pp.261-274
    • /
    • 1998
  • 이 연구에는 가축성 강재지보에 대한 실내실험 및 현장실험 결과가 제시된다. 시험지보는 단위중량이 25.8kg/m인 Gloken profile U 빔 3매를 조립하여 제작되었다. 양단이 힌지로 지지되는 반원형 및 아치형 지보에 대한 정역학적인 해석이 실시되었다. 실험된 U빔의 형상계수는 1.35이었고 지보형태에 따른 2차 소성힌지의 위치를 산정하였다. 천장부에서 단일집중하중을 받는 아치형 지보의 내하력을 조사하여 이를 지보 각주 길이의 함수로 나타내었다. U 빔 연결부의 결합토크를 변화시키는 실물크기 지보시험을 수행하여 시험지보의 가축특성을 파악하였으며, 결합토크를 설계하는 방법을 연구하였다. 결합토크가 21kg.m 인 시험지보를 현장에 설치하고 계측한 결과 전형적인 가축현상을 관찰할 수 있었다.

  • PDF

소경단목재(小輕短木材) 접목을 활용한 유니트 가변형 테이블디자인 연구개발 (The Study of the Changeable Table Design with Units that made of Wasted Wood)

  • 김명태;서석민
    • 한국가구학회지
    • /
    • v.23 no.1
    • /
    • pp.26-37
    • /
    • 2012
  • This is the study about the New Formation Developement, the Changeable Table Design with Units that made of Wasted Wood to use restricted material rationally and to improve the space efficiency in the Table Design. We made some changeable table design with units that made of laminated wood wasted. And we found out the following formative characteristic and physical merits through this study. First, the space efficiency can be improve technically through the unit combination and organic transfomation of the specific form and a new method by laminated wood make the personal originality and the structral stability be built up. Second, there are some merits, moveable convenience and variable layout by the combination or transformation or personal fondness so that economical efficiency and variable of design can be improved. Third, we can remove original faults inside wood like a knot or not-uniform of wood organ when we laminate wood so that we use proper units that have original beauty of wood and can represent mild mood of furniture wholly. Fourth, much more strengthen tensile strength by the reciprocal action among the units that be made of laminated wood reduces wood's metamorphosis like bending or twisting so that the uniformity of wood can be gain and furniture's metamorphosis can be reduced. According to changes of nature environment, the difficulty of supply and demand for wood may be happen. According to changes of life style these days, supply and demand for environment friendly material, processing technique and developement of design to improve the efficiency of using space must be very important factor in morden furniture design. So we propose changeable furniture design by using new environment friendly meterial and processing method from this study.

  • PDF