Development of a Simple Drape Measurement Method for 3D Virtualization

3D 가상화를 위한 드레이프성 간이 측정법 개발

  • 신보나 (이화여자대학교 의류산업학과) ;
  • 유동주 (이화여자대학교 의류산업학과) ;
  • 이소민 (이화여자대학교 의류산업학과) ;
  • 윤선영 (한국섬유수출입협회) ;
  • 심명희 (한국섬유수출입협회) ;
  • 윤창상 (이화여자대학교 의류산업학과)
  • Received : 2021.07.16
  • Accepted : 2021.09.13
  • Published : 2021.10.31


This study proposes a simple drape measurement method for the 3D virtualization of garments. The proposed method uses angles or disks of different diameters to evaluate the drape properties easily. We divided 710 fabrics into ten groups based on the drape coefficient, of which 49.6% had drape coefficients of 30 or less. The drape properties were measured to classify the groups into smaller clusters using the angle formed when the center of the fabric was fixed. Accordingly, three clusters were formed for 60° and 100° angles. A method was devised using ten disks of different diameters to classify the remaining two clusters, except the cluster containing only the D10 group (D1-D5 and D5-D9). Three criteria-grade match, a sum of deviation, and standardization of deviation-were used for the classifications. The discriminative ability between groups was high for D1-D5 with disks with 24.0 and 25.5 cm diameters. Furthermore, a disk with a diameter of 16.5 cm was effective for D5-D9. The three-dimensional drape shapes were unique for the ten groups, which can be utilized as fundamental data for 3D virtualization.



본 논문은 2020년도 한국산업기술진흥원 산업기술기반구축혁신사업의 지원을 받아 수행된 연구임(No. P114000015).