Hysteresis modeling for cyclic behavior of concrete-steel composite joints using modified CSO

  • Yu, Yang (Centre for Infrastructure Engineering, Western Sydney University) ;
  • Samali, Bijan (Centre for Infrastructure Engineering, Western Sydney University) ;
  • Zhang, Chunwei (School of Civil Engineering, Qingdao University of Technology) ;
  • Askari, Mohsen (Centre for Infrastructure Engineering, Western Sydney University)
  • 투고 : 2019.05.11
  • 심사 : 2019.10.14
  • 발행 : 2019.10.25


Concrete filled steel tubular (CFST) column joints with composite beams have been widely used as lateral loading resisting elements in civil infrastructure. To better utilize these innovative joints for the application of structural seismic design and analysis, it is of great importance to investigate the dynamic behavior of the joint under cyclic loading. With this aim in mind, a novel phenomenal model has been put forward in this paper, in which a Bouc-Wen hysteresis component is employed to portray the strength and stiffness deterioration phenomenon caused by increment of loading cycle. Then, a modified chicken swarm optimization algorithm was used to estimate the optimal model parameters via solving a global minimum optimization problem. Finally, the experimental data tested from five specimens subjected to cyclic loadings were used to validate the performance of the proposed model. The results effectively demonstrate that the proposed model is an easy and more realistic tool that can be used for the pre-design of CFST column joints with reduced beam section (RBS) composite beams.


composite joint; cyclic loading; hysteresis; model identification; chicken swarm optimization


연구 과제 주관 기관 : National Natural Science Foundation of China, Australian Research Council


  1. Al Shayokh, M. and Shin, S.Y. (2017), "Bio inspired distributed WSN localization based on chicken swarm optimization", Wireless Pers. Commun., 97(4), 5691-5706.
  2. AS 1012.9 (2014), Methods of testing concrete, Method 9: compressive strength tests-concrete, mortar and grout specimens, Standards Australia; Sydney, Australia.
  3. AS 1012.10 (2014), Methods of testing concrete, Method 10: determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test), Standards Australia; Sydney, Australia.
  4. AS 2327.1 (2003), Composite structures, Part 1: simply supported beams, Standards Australia; Sydney, Australia.
  5. Baber, T.T. and Noori, M.N. (1985), "Random vibration of degrading, pinching systems", J. Eng. Mech., 111(8), 1010-1026.
  6. Baber, T.T. and Wen, Y.K. (1981), "Random vibration hysteretic, degrading systems", ASCE J. Eng. Mech. Div., 107(6), 1069-1087.
  7. BS EN 1993-1-1 (2005), Design of steel structures, Part 1. 1: general rules and rules for buildings, British Standards Institution; London, United Kingdom.
  8. BS EN 1994-1-1 (2006), Design of composite steel and concrete structures, Part 1. 1: general rules and rules for buildings, British Standards Institution; London, United Kingdom.
  9. Chao, S.H. and Loh, C.H. (2009), "A biaxial hysteretic model for a structural system incorporating strength deterioration and pinching phenomena", Int. J. Nonlin. Mech., 44(7), 745-756.
  10. Chen, S., Yang, R., Yang, R., Yang, L., Yang, X., Xu, C., Xu, B., Zhang, H., Lu, Y. and Liu, W. (2016), "A parameter estimation method for nonlinear systems based on improved boundary chicken swarm optimization", Discrete Dyn. Nat. Soc., 2016, 3795961.
  11. Clough, R.W. and Johnston, S.B. (1966), "Effect of stiffness degradation on earthquake ductility requirements", Proceedings of the 2nd Japan National Conference on Earthquake Engineering, International Association for Earthquake Engineering, Tokyo, pp. 227-232.
  12. Das, A., Hirwani, C.K., Panda, S.K., Topal, U. and Dede, T. (2018), "Prediction and analysis of optimal frequency of layered composite structure using higher-order FEM and soft computing techniques", Steel Compos. Struct., Int. J., 29(6), 749-758.
  13. Dowell, R.K., Seible, F. and Wilson, E.L. (1998), "Pivot hysteresis model for reinforced concrete members", ACI Struct. J., 95(5), 607-617.
  14. Farrokh, M., Dizaji, M.S. and Joghataie, A. (2015), "Modeling hysteretic deteriorating behavior using generalized prandtl neural network", J. Eng. Mech., 141(8), 04015024.
  15. Foliente, G.C. (1995), "Hysteresis modeling of wood joints and structural systems", J. Struct. Eng., 121(6), 1013-1022.
  16. Han, L.-H., Xu, C.-Y. and Tao, Z. (2019), "Performance of concrete filled stainless steel tubular (CFSST) columns and joints: Summary of recent research", J. Constr. Steel Res., 152, 117-131.
  17. Ho-Huu, V., Vo-Duy, T., Duong-Gia, D. and Nguyen-Thoi, T. (2018), "An efficient procedure for lightweight optimal design of composite laminated beams", Steel Compos. Struct., Int. J., 27(3), 297-310.
  18. Ibarra, L.F., Medina, R.A. and Krawinkler, H. (2005), "Hysteretic models that incorporate strength and stiffness deterioration", Earthq. Eng. Struct. D., 34(12), 1489-1511.
  19. Li, D., Uy, B., Patel, V. and Aslani, F. (2017a), "Analysis and design of demountable embedded steel column base connections", Steel Compos. Struct., Int. J., 23(3), 303-315.
  20. Li, R., Samali, B., Tao, Z. and Hassan, M.K. (2017b), "Cyclic behaviour of composite joints with reduced beam sections", Eng. Struct., 136, 329-344.
  21. Li, D., Uy, B., Patel, V. and Aslani, F. (2018a), "Behaviour and design of demountable CFST column-column connections subjected to compression", J. Constr. Steel. Res., 141, 262-274.
  22. Li, D., Wang, J., Uy, B., Aslani, F. and Patel, V. (2018b), "Analysis and design of demountable circular CFST column-base connections", Steel Compos. Struct., Int. J., 28(5), 559-571.
  23. Liu, D., Liu, C., Fu, Q., Li, T., Khan, M.I., Cui, S. and Faiz, M.A. (2018), "Projection pursuit evaluation model of regional surface water environment based on improved chicken swarm optimization algorithm", Water Resour. Manag., 32(4), 1325-1342.
  24. Ma, D.-Y., Han, L.-H. and Zhao, X.-L. (2019), "Seismic performance of the concrete-encased CFST column to RC beam joint: Experiment", J. Constr. Steel. Res., 154, 134-148.
  25. McCrum, D.P., Simon, J., Grimes, M., Broderick, B.M., Lim, J.B.P. and Wrzesien, A.M. (2019), "Experimental cyclic performance of cold-formed steel bolted moment resisting frames", Eng. Struct., 181, 1-14.
  26. Meng, X., Liu, Y., Gao, X. and Zhang, H. (2014), "A new bioinspired algorithm: Chicken swarm optimization", Lect. Notes Comput. Sci., 8794, 86-94.
  27. Ning, C., Yu, B. and Li, B. (2016), "Beam-column joint model for nonlinear analysis of non-seismically detailed reinforced concrete frame", J. Earthq. Eng., 20(3), 476-502.
  28. Nithyadharan, M. and Kalyanaraman, V. (2013), "Modelling hysteretic behaviour of cold-formed steel wall panels", Eng. Struct., 46, 643-652.
  29. Otani, S. and Sozen, M. (1974), "Simulated earthquake tests of R/C frames", ASCE J. Eng. Mech. Div., 100, 687-701.
  30. Ozcebe, G. and Saatcioglu, M. (1989), "Hysteretic shear model for reinforced concrete members", J. Struct. Eng., 115(1), 132-148.
  31. Ray, T. and Reinhorn, A.M. (2014), "Enhanced smooth hysteretic model with degrading properties", J. Struct. Eng., 140(1), 04013028.
  32. Sengupta, P. and Li, B. (2013), "Modified Bouc-Wen model for hysteresis behavior of RC beam-column joints with limited transverse reinforcement", Eng. Struct., 46, 392-406.
  33. Sengupta, P. and Li, B. (2014), "Hysteresis behavior of reinforced concrete walls", J. Struct. Eng., 140(7), 04014030.
  34. Sezen, H. and Chowdhury, T. (2009), "Hysteretic model for reinforced concrete columns including the effect of shear and axial load failure", J. Struct. Eng. 135(2), 139-146.
  35. Sofianos, C.D. and Koumousis, V.K. (2018), "Hysteretic beam element with degrading smooth models", Arch. Appl. Mech., 88(1-2), 253-269.
  36. Thai, H.-T. and Uy, B. (2015), "Finite element modelling of blind bolted composite joints", J. Constr. Steel. Res., 112, 339-353.
  37. Thai, H.-T. and Uy, B. (2016), "Rotational stiffness and moment resistance of bolted endplate joints with hollow or CFST columns", J. Constr. Steel. Res., 126, 139-152.
  38. Varnava, V. and Komodromos, P. (2013), "Assessing the effect of inherent nonlinearities in the analysis and design of a low-rise base isolated steel building", Earthq. Struct., Int. J., 5(5), 499-526.
  39. Veletsos, A.S., Newmark, N.M. and Chelapati, C.V. (1965), "Deformation spectra for elastic and elastoplastic systems subjected to ground shock and earthquake motions", Wellington, New Zealand, January.
  40. Wang, J.F., Han, L.H. and Uy, B. (2009), "Hysteretic behaviour of flush end plate joints to concrete-filled steel tubular columns", J. Constr. Steel Res., 65(8-9), 1644-1663.
  41. Wang, P.H., Ou, Y.C. and Chang, K.C. (2017), "A new smooth hysteretic model for ductile flexural-dominated reinforced concrete bridge columns", Earthq. Eng. Struct. D., 46(14), 2237-2259.
  42. Wang, J., Zhu, H., Uy, B., Patel, V., Aslani, F. and Li, D. (2018), "Moment-rotation relationship of hollow-section beam-tocolumn steel joints with extended end-plates", Steel Compos. Struct., Int. J., 29(6), 717-734.
  43. Wang, J., Yang, J. and Cheng, L. (2019), "Experimental study of seismic behavior of high-strength RC columns strengthened with CFRP subjected to cyclic loading", J. Struct. Eng., 145(2), 04018240.
  44. Wen, Y.K. (1976), "Method for random vibration of hysteretic systems", ASCE J. Eng. Mech. Div. 102(2), 249-263.
  45. Wu, D., Xu, S. and Kong, F. (2016), "Convergence analysis and improvement of the chicken swarm optimization algorithm", IEEE Access, 4, 9400-9412.
  46. Yu, B., Ning, C. and Li, B. (2016), "Hysteretic model for shearcritical reinforced concrete columns", J. Struct. Eng., 142(9), 04016056.