DOI QR코드

DOI QR Code

Neutronics design of VVER-1000 fuel assembly with burnable poison particles

  • Tran, Hoai-Nam (Institute of Fundamental and Applied Sciences, Duy Tan University) ;
  • Hoang, Van-Khanh (Institute for Nuclear Science and Technology, VINATOM) ;
  • Liem, Peng Hong (Cooperative Major in Nuclear Energy, Graduate School of Engineering, Tokyo City University (TCU)) ;
  • Hoang, Hung T.P. (Nuclear Training Center, VINATOM)
  • 투고 : 2019.03.30
  • 심사 : 2019.05.28
  • 발행 : 2019.10.25

초록

This paper presents neutronics design of VVER-1000 fuel assembly using burnable poison particles (BPPs) for controlling excess reactivity and pin-wise power distribution. The advantage of using BPPs is that the thermal conductivity of BPP-dispersed fuel pin could be improved. Numerical calculations have been conducted for optimizing the BPP parameters using the MVP code and the JENDL-3.3 data library. The results show that by using $Gd_2O_3$ particles with the diameter of $60{\mu}m$ and the packing fraction of 5%, the burnup reactivity curve and pin-wise power distribution are obtained approximately that of the reference design. To minimize power peaking factor (PPF), total BP amount has been distributed in a larger number of fuel rods. Optimization has been conducted for the number of BPP-dispersed rods, their distribution, BPP diameter and packing fraction. Two models of assembly consisting of 18 BPP-dispersed rods have been selected. The diameter of $300{\mu}m$ and the packing fraction of 3.33% were determined so that the burnup reactivity curve is approximate that of the reference one, while the PPF can be decreased from 1.167 to 1.105 and 1.113, respectively. Application of BPPs for compensating the reduction of soluble boron content to 50% and 0% is also investigated.

과제정보

연구 과제 주관 기관 : National Foundation for Science and Technology Development (NAFOSTED)

참고문헌

  1. M.-S. Yahya, H. Yu, Y. Kim, Burnable absorber-integrated guide thimble (BigT) - I: design concepts and neutronic characterization on the fuel assembly benchmarks, J. Nucl. Sci. Technol. 53 (7) (2016) 1048-1060. https://doi.org/10.1080/00223131.2015.1090937
  2. H. Yu, M.-S. Yahya, Y. Kim, A reduced-boron OPR1000 core based on the BigT burnable absorber, Nucl. Eng. Technol. 48 (2) (2016) 318-329. https://doi.org/10.1016/j.net.2015.12.010
  3. H. Yoo, D.H. Hwang, S.G. Hong, H.C. Shin, New long-cycle small modular PWR cores using particle type burnable poisons for low boron operation, Nucl. Eng. Des. 314 (2017) 173-181. https://doi.org/10.1016/j.nucengdes.2017.01.020
  4. J. Choe, H.C. Shin, D. Lee, New burnable absorber for long-cycle low boron operation of pwrs, Ann. Nucl. Energy 88 (2016) 272-279. https://doi.org/10.1016/j.anucene.2015.11.011
  5. A.A. Galahom, Investigation of different burnable absorbers effects on the neutronic characteristics of PWR assembly, Ann. Nucl. Energy 94 (2016) 22-31. https://doi.org/10.1016/j.anucene.2016.02.025
  6. F. Khoshahval, S.S. Foroutan, A. Zolfaghari, H. Minuchehr, Evaluation of burnable absorber rods effect on neutronic performance in fuel assembly of WWER-1000 reactor, Ann. Nucl. Energy 87 (2016) 648-658. https://doi.org/10.1016/j.anucene.2015.10.012
  7. S. Fukushima, T. Ohmichi, A. Maeda, H. Watanabe, The effect of gadolinium content on the thermal conductivity of near-stoichiometric $(U,Gd)O_2$ solid solutions, J. Nucl. Mater. 105 (2) (1982) 201-210. https://doi.org/10.1016/0022-3115(82)90375-0
  8. M. Amaya, M. Hirai, H. Sakurai, K. Ito, M. Sasaki, T. Nomata, K. Kamimura, R. Iwasaki, Thermal conductivities of irradiated $UO_2$ and $(U,Gd)O_2$ pellets, J. Nucl. Mater. 46 (7) (2002) 673-676.
  9. K. Iwasaki, T. Matsui, K. Yanai, R. Yuda, Y. Arita, T. Nagasaki, N. Yokoyama, I. Tokura, K. Une, K. Harada, Effect of $Gd_2O_3$ dispersion on the thermal conductivity of $UO_2$, J. Nucl. Sci. Technol. 300 (1) (2009) 57-64.
  10. H.-N. Tran, H.T.P. Hoang, P.H. Liem, Feasibility of using $Gd_2O_3$ particles in VVER-1000 fuel assembly for controlling excess reactivity, Energy Procedia 131 (2017) 29-36. https://doi.org/10.1016/j.egypro.2017.09.442
  11. NEA/NSC/DOC 10, A VVER-1000 LEU and MOX Assembly Computational Benchmark, Nuclear Energy Agency, Organization for Economic Co-operation and Development, 2002.
  12. Y. Nagaya, K. Okumura, T. Mori, M. Nakagawa, MVP/GMVP II: general purpose Monte Carlo codes for neutron and photon transport calculations based on continuous energy and multigroup methods, J. Architect. Educ. 1348 (2005).
  13. K. Shibata, T. Kawano, T. Nakagawa, O. Iwamoto, J.-I. Katakura, T. Fukahori, et al., Japanese evaluated nuclear data library version 3 revision-3: JENDL-3.3, J. Nucl. Sci. Technol. 39 (11) (2002) 1125-1136. https://doi.org/10.1080/18811248.2002.9715303
  14. H.N. Tran, Y. Kato, An optimal loading principle of burnable poisons for an OTTO refueling scheme in pebble bed HTGR cores, Nucl. Eng. Des. 239 (11) (2009) 2357-2364. https://doi.org/10.1016/j.nucengdes.2009.07.022
  15. H.N. Tran, V.K. Hoang, Neutronic characteristics of an OTTO refueling PBMR, Nucl. Eng. Des. 253 (2012) 269-276. https://doi.org/10.1016/j.nucengdes.2012.08.028