DOI QR코드

DOI QR Code

A Study on the Estimation of Optimal Storage Area in the Distribution Center

유통물류센터의 최적 보관면적 산출 방법에 관한 연구

  • Park, Jung-Hyun (Graduate School of Logistics, Incheon National University) ;
  • Kim, Dong-Myung (Graduate School of Logistics, Incheon National University) ;
  • Yeo, Gi-Tae (Graduate School of Logistics, Incheon National University)
  • 박정현 (인천대학교 동북아물류대학원) ;
  • 김동명 (인천대학교 동북아물류대학원) ;
  • 여기태 (인천대학교 동북아물류대학원)
  • Received : 2019.04.30
  • Accepted : 2019.07.20
  • Published : 2019.07.28

Abstract

The distribution logistics center has its own inventory, so designing an efficient storage area is very important. The purpose of this study is to present the optimal storage area calculation method for distribution logistics center considering the use of standard pallet unit load, and the results of this study are as follows. First, standard rack modules for storing T-11 and T-12 type pallet, which is generally used in Korea, were defined. Second, a variety of pallet transport equipments were investigated and analyzed to define the standard transport equipment's work passageway by type. Finally, it has great implications in terms of suggesting measures to minimize unused space that may occur during placement of pallet rack modules within storage space, as well as the easy and optimal calculation of the storage area for the distribution logistics center. Future research require a study on the layout of the entire distribution logistics center, which reflects the latest logistics technologies, such as standard rack modules for Mini-Load and GTP picking system.

Keywords

Distribution Logistics Center;Storage Space;Unit Load;Space Optimization;T-12

DJTJBT_2019_v17n7_59_f0001.png 이미지

Fig. 1. Domestic Logistics Center Registration Status

DJTJBT_2019_v17n7_59_f0002.png 이미지

Fig. 2. Major pain points on operating distribution center

DJTJBT_2019_v17n7_59_f0003.png 이미지

Fig. 3. Major weak points in storage area

DJTJBT_2019_v17n7_59_f0004.png 이미지

Fig. 4. Standard Pallet Rack Module by Type

Table 1. Current status of logistics system for Korean retailers

DJTJBT_2019_v17n7_59_t0001.png 이미지

Table 2. Major Logistics Facility Analysis Results

DJTJBT_2019_v17n7_59_t0002.png 이미지

Table 3. Major configuration details of the pallet rack

DJTJBT_2019_v17n7_59_t0003.png 이미지

Table 4. Rack Module Area Comparison by Type

DJTJBT_2019_v17n7_59_t0004.png 이미지

Table 5. Application of Storage Facilities by pallet Transport Equipment

DJTJBT_2019_v17n7_59_t0005.png 이미지

Table 6. Standard aisle width criteria for each pallet transport equipment(forklift) type

DJTJBT_2019_v17n7_59_t0006.png 이미지

Table 7. Standard working path criteria by type

DJTJBT_2019_v17n7_59_t0007.png 이미지

Table 8. Column type in the rack storage

DJTJBT_2019_v17n7_59_t0008.png 이미지

Table 10. Criteria for optimal column spacing for placement of pallet racks

DJTJBT_2019_v17n7_59_t0009.png 이미지

Table 9. New column Interval Setting Rule

DJTJBT_2019_v17n7_59_t0010.png 이미지

Table 11. Analysis results of required floor space by pallet type and rack level(1)

DJTJBT_2019_v17n7_59_t0011.png 이미지

Table 12. Analysis results of required floor space by pallet type and rack level(2)

DJTJBT_2019_v17n7_59_t0012.png 이미지

References

  1. KST (2005). system of logistics module. https://standard.go.kr/KSCI/standardIntro/getStandardSearchView.do.
  2. KST. (2007). Width of aisle in warehouse. https://standard.go.kr/KSCI/standardIntro/getStandardSearchView.do
  3. KST. (2010). Criteria for Facilities of Logistics Center. https://standard.go.kr/KSCI/standardIntro/getStandardSearchView.do
  4. M. B. Lee & W. J. Kim. (2007). A Study on the Standardization of Unit Load System. Korea Logistics Reviews, 17(3), 141-162.
  5. C. H. Choi (2009). A New Evaluation Method for the Effectiveness of Standardized Storage Facilities. The Korean society for railway, 2009(5), 1924-1930.
  6. J. I. Lee. (2018). The 'Survival Era' of the Disgusting Logistics Center, Gyotongnews paper : http://www.gyotongn.com/news/articleView.html?idxno=216818
  7. KST. (2004). Criteria for facilities of logistics facilities. https://standard.go.kr/KSCI/standardIntro/getStandardSearchView.do
  8. E. K. Kim. (2015). A study on the Determinants of ambient temperature multistory distribution center working aisle and column space. Master dissertation. Hanyang university, Seoul.
  9. G. S. Yun & J. S. Park. (2013). A Study on the Logistics Standardization Impact on Corporate Efficiency. Korea Logistics Reviews, 23(5), 167-188.
  10. J. W. Lee. (2015). A Study on the Trends of Automated Logistics Equipment Market and Its Perception in Korea. East Asian Logistics Trends, 2015(86), 92-101.
  11. S. G. Choi. (2016). A Study on Efficient operations of the Commodities at Distribution logistics center. Master dissertation. Seokyeong university, Seoul.
  12. J. K. Shin, C. H. Lee & B. S. Son. (2010). A Study on Important Factors influencing Operation Efficiency of the Logistics Center. Korea Logistics Reviews, 20, 141-158.
  13. S. H. Choi, K. M. Hong & H. J. Kim. (2018). A Study on Needs of the Logistics Technology in Korea, Korea Maritime Institute
  14. S. D. Yeom & T. U. Rho. (2016). A Study on the Determinant of Logistics Warehouse Location. reacademy, 67, 73-86.
  15. J. Bond. (2018). Top 20 Material Handling System Suppliers in 2017. Modern Materilas handling, https://www.mmh.com/article/top_20_material_handling_system_suppliers_in_2017
  16. M. S. Seo. (2017). Effect on Corporation's Performance and Logistics by developing Distribution Industry to Omni-Channel. Master dissertation. Korea Aerospace University, Goyang.
  17. M. J. Kim. (2018). Distribution - Well done online company who good at Offline Company. Mirae Asset Daewoo Research. 57-67.
  18. J. H. Park, J. G. Oh, D. M. Kim & G. T. Yeo. (2019). A Study on the Establishment Direction of Smart Distribution Logistics Center in the era of the Fourth Industrial Revolution, Journal of Digital Convergence, 17(2), 59-71. DOI : 10.14400/JDC.2019.17.2.059
  19. M. Tutam & J. A. White(2019). A multi-dock, unit-load warehouse design, IISE Transactions 51(3), 232-247. DOI : 10.1080/24725854.2018.1488307 https://doi.org/10.1080/24725854.2018.1488307
  20. F. Yener & H. R. Yazgan. (2019). "Optimal warehouse design: Literature review and case study application", Computers & Industrial Engineering, 129, 1-13. DOI : 10.1016/j.cie.2019.01.006 https://doi.org/10.1016/j.cie.2019.01.006
  21. D. Mourtzis, V. Samothrakis, V. Zogopoulos &E. Vlachou (2019). Warehouse design and operation using augmented reality technology: A papermaking industry case study, Procedia CIRP, 79, 574-579. DOI : 10.1016/j.procir.2019.02.097 https://doi.org/10.1016/j.procir.2019.02.097
  22. Y. J. Kim, S. Lee & K. T. Kim. (2010). Study on Area Calculation in Warehouse. The Korean society for railway, 2010(7), 1567-1573.
  23. S. Lee, Y. J. Kim & Y. J. Kwon. (2010). Development of Layout Design Algorithm for Warehouse. The Korean society for railway, 2010(7), 1574-1579.
  24. Korea Railroad Research Institute. (2018). Development of the National Logistics Standards System.
  25. S. K. Choi, H. S. Kim & W. S. Park. (2014). The simulation study on working time of unit load cargo in warehouse. The Journal of shipping and logistics, 81, 219-240.
  26. B. Rouwenhorst, B. Reuter, B. Stochrahm, G.J. Houtum, R.J. Mantel & W.H. Zijm. (2000). Warehouse design and control: Framework and literature review. European Journal of Operational Research, 122, 515-533. DOI : 10.1016/S0377-2217(99)00020-X https://doi.org/10.1016/S0377-2217(99)00020-X
  27. L. F. Thomas. (2000). Warehouse Layout and Design, Freese & Associates, Inc.
  28. M.D. Mohsen. (2002). A Framework for the design of warehouse layout. Facilities, 20(13,14), 432-440. DOI: 10.1108/02632770210454377 https://doi.org/10.1108/02632770210454377
  29. B. M. Rene, D. Koster, L. Andrew & R. Debjit. (2017). "Warehouse design and management", International Journal of Proudction Research, 55(21), 6327-6330. DOI : 10.1080/00207543.2017.1371856 https://doi.org/10.1080/00207543.2017.1371856
  30. H. Zhang, Z. Guo, H. Cai, C. Wang, W. Zhang, Y. Yu, W. Li & J. Wang (2018). Layout design for intelligent warehouse by evolution with fitness approximation, ArXiv.org, Cornell University.
  31. P. Baker & M. Canessa. (2009). Warehouse design: A structured approach. European Journal of Operational Research, 193(2), 425-436. DOI : 10.1016/j.ejor.2007.11.045 https://doi.org/10.1016/j.ejor.2007.11.045
  32. V.K. Dubey & D. Veeramani. (2017). A framework for sizing an automated distribution center in a retail supply chain, Simulation Modelling Practice and Theory 75, 113-126. DOI : 10.1016/j.simpat.2017.03.014 https://doi.org/10.1016/j.simpat.2017.03.014
  33. B.M. Rene. (2010). Warehouse Math In: L.Kroon, T.L, R. Zuidwijk(Eds.), Liber amicorum, RSM-Dinalog, 179-186.
  34. B. D. Ahn. (1997). Standardization of automatic warehouses. Daejeon : Korea Research Institute of Standards and Science.
  35. M. S. Jeon (2004). Study on Aisle Width for Forklift Truck in Warehouse, Korea Logistics Reviews, 20(5), 175-200.
  36. Y. J. Kim, S. Lee, K. T. Kim & Y. J. Kwon. (2010). Study on Aisle Width for Forklift Truck in Warehouse, Korea Logistics Reviews, 20(5), 175-200.
  37. Csico-Eagle,Pallet Rack Specification : http://www.cisco-eagle.com/catalog/c-3051-selective-rack-configuration.aspx
  38. Ridg-U-Rak : http://www.ridgurak.com/images/pdfs/RidgPalletRackBrochureWeb5503.pdf
  39. Carson : http://www.carsonrack.com/info.html
  40. Shinhanrack : http://shinhanrack.co.kr
  41. Daeyoung : http://dy-rack.com/m_product1_1.php
  42. Tlens Company Limited by Shares : http://www.tlens.co.kr/sub/product/pallet.html
  43. Hankukangle : http://www.hankookangle.co.kr/
  44. Pia Logistics : http://pialogis.com/?NVKWD=%EB%9E%99&NVADKWD=%EB%9E%99&NVAR=PL&NVADID=27950198+0ya1002KJcDhXJy4007Z
  45. Nex Logistics : http://www.nexlt.co.kr/keep_rack/pallet_rack.php?s=2&m=1
  46. L. S. Jeon. (2007). A study planning a logistics center to operating. Goyang : Bumhanp