Development of Intelligent IoT Exhaustion System for Bag Filter Collector

백필터 집진기의 지능형 IoT 탈진 시스템 개발

  • 장성철 (한국폴리텍IV대학 충주캠퍼스 기계시스템과) ;
  • 이정원 (에스엠티(주) 기술연구소)
  • Received : 2019.03.17
  • Accepted : 2019.06.03
  • Published : 2019.06.30


A bag filter collector is a kind of air purifier that organizes several or dozens of filters to purify fine dust and release clean air into the atmosphere. If the bag filter length is less than 5m, the dust and fume attached to the bag filter could be effectively removed by passing the compressed air generated by the diaphragm valve through the venturi. Injectors that are more efficient and economical are urgently needed to achieve satisfactory results for long-bag exhaustion of more than 7 meters. In the case of existing domestic and foreign injectors, a number of blow tubes were dismantled during maintenance, and the injector and blow tube were combined to pose a number of problems, including inconvenience of work due to weight increase. In this study, injector flow for the development of the best use of interpretation of the coanda effect and the fourth round of industrial technology Intelligent automation of exhaustion, have been engineered energy than standard equipment. lowering costs and filter life to radically improve the commercial studies.


  1. G Klein, T Schrooten, L Schenk, R Esser and A Koogel, "Face the operating costs," Intensiv-Filter GmbH, Germany. 2009.
  2. Jang, S. C., Han, S. M., Lee, C. K., & Jung H. C., "FSI Analysis of Pneumatic Actuator", KSPSE Spring Conference, pp.81-83, 2016.
  3. Menter, F. and Esch, T., "Elements of Industrial Heat Transfer Predictions," 16th Bazilian Congress of Mechanical Engineering (COBEM), Uberlandia, Brazil. 2001.
  4. D. C. Wilcox, "Turbulence modeling for CFD, DCW industries", Inc. La Canada, CA, 1993.
  5. Launder, B. E. and Spalding, D. B., The numerical computational of turbulence flows", Computational methods in applied mechanics and engineering, Vol.3, pp.269-289, 1972.
  6. K. Keller, "Low cost, high performance, high volume heatsinks", in Proc.Electronics Manufacturing Technology Symposium, pp. 113-118, 1998.
  7. S. Narasimhan and J. Majdalani, "Characterization of compact heat sink models in natural convection", IEEE Trans. Components and Packaging Technologies, Vol. 25, Issue 1, pp.78-86, March 2002.
  8. S. P. Watson and B. G. Sammakia, "The thermal performance of a chip scale package array with simple block and plate heat sinks", in Proc. Thermal and Thermomechanical Phenomena in Electronic Systems Conf, pp 276284, 2002.
  9. Jang, S. C., Han, S. M., Lee, C. K., & Jung H. C., "FSI Analysis of Pneumatic Actuator", KSPSE Spring Conference, pp.81-83, 2016.
  10. Jang, S. C., Cho, H. D., and Kim, N. K., "Development of Gear Type Vane Damper Change Link Type in FD Fan, "KSMTE, Vol. 13, No. 1, pp.104-109. 2000.
  11. Jang, S. C., Han, S. H., and Kim, J. W., , "A Study on Performance Improvement of Gear Type Vane Damper in FD Fan(Productivity Increases & Construction Improvement)" KSMTE J. Vol. 19, No.1, pp. 134-139. 2010.
  12. Yi, C. S., Hong, J. K., Suh, J. S., Shin, Y. I. and Park, Y. S., 2009, "Effect of Cutoff Angle on the Flow Characteristic of Turbo-Fan", Conference Proceedings of KSME Spring Annual Meeting(KSME 09TE068), pp. 311-318. 2015.
  13. P. J. Witt, C. G. Solnordal, L. J. Mittoni, S. Finn, J. Pluta, "Optimising the Design of Fume Extraction Hoods Using a Combination of Engineering and CFD Modelling", Applied Mathematical Modelling, Vol. 30, No.11, pp.1167-1179. 2006,
  14. Dudley, D.W., 1984, Hanbook of Practical Gear Design, McGraw-Hill. ANSI/AGMA 2003-A86, Rating the Pitting and Bendinf Strength of Generated Straight Bevel, ZEROL Bevel, and Spiral Bevel Gear Teeth. 2008,
  15. Choong Hyun Kim, Hyo Sok Ahn and Tae Hyong Chong, 2003, "On a Method for the Durability Enhancement of Plastic Spur Gear Using Finite Element Analysis", Transactions of the KSME A, Vol. 27, No. 2, pp.223-230. 2006.