DOI QR코드

DOI QR Code

Analysis of the Manufacturing Techniques for the KwangDahoe Tying on the Sword in Joseon Dynasty

조선시대 도검 패용 광다회의 제작기법 분석

  • Baek, Je-Sun (The Institute of Conservation Science, Korea National University of Cultural Heritage) ;
  • Chung, Kwang-Young (The Institute of Conservation Science, Korea National University of Cultural Heritage)
  • 백지선 (한국전통문화대학교 보존과학연구소) ;
  • 정광용 (한국전통문화대학교 보존과학연구소)
  • Received : 2017.06.30
  • Accepted : 2017.08.24
  • Published : 2017.09.30

Abstract

Dahoe is a traditional braid in Joseon Dynasty. There are many Dahoe artifacts, which can give us a glimpse of the costume, culture, and life of that era. The study of Dahoe is necessary in various fields, but it is difficult because this manufacturing technique has been passed down from hand to hand. Few studies have been done so far. This research examines the manufacturing technique of KwangDahoe which is passed down by Maedeupjang (Decorative Knotting) and is generally used for knotting and/or tying objects. The main characteristic of TieKwangDahoe, made through the same method as WonDahoe, is the square hole in the middle. It was impossibile to remake the original braid because there is no confirmed number of the strand. Especially it is very difficult to do conservation and restoration on serious degradation state of the fiber. Therefore, it is necessary to analyze the non-destructive manufacturing techniques method for Dahoe and assess their applicability. First, we analyzed the artifacts' manufacturing technique based on the database of the Dahoe's manufacturing technique. In order to do that, we undertook schematization, restoration, morphological analyzation of the Dahoe. And then, X-ray CT scans were performed to improve the reliability of the DB. These results of scanning were interpreted based on the manufacturing technique. The selected Tie-KwangDahoe on the sword for the study are artifacts including artistic value and symbolism in Joseon Dynasty. Based on the analysis of the manufacturing technique, we found that both artifacts were made of 20-strand braid of single cross according to the length-scale measure. It was manufactured using 8-strand on left-right side, 12-strand on front-back side by the braiding manufacturing technique method Finally, this research suggests non-destructive analysis method of Dahoe's manufacturing technique is based on the database and the analysis results. I hope this research can be useful in various professional fields of Dahoe in the future. Moreover, I hope this can be of any help in preserving Korean cultural heritage.

References

  1. 고려대학교박물관.경인미술관, 2008, 칼, 실용과 상징, (주)중앙문화인쇄, pp176-180
  2. 국립고궁박물관, 2011, 상.폐슬 - 국립고궁박물관 복원.복제 제작기술서 -, 비에이디자인
  3. 국립민속박물관, 2003, 한국 전통무기 조사 - 도검.화기류 -, 경희정보인쇄(주), pp.17-20
  4. 국립중앙박물관, 2004, 한국 전통 매듭 - 균형과 질서의 미학 -, 한국박물관회, p.31
  5. 국방군사연구소, 1994, 한국무기발달사, 군인공제회, pp.256-270
  6. 김시재.조우현, 2012, 조선시대 조대(條帶)와 끈목 제작에 관한 연구 조형디자인연구 제15집 제3권, 조형디자인학회, pp.43-44
  7. 김시재, 2008, 조선시대(條帶)의 형태적 특징과 제작법에 관한 연구, 성균관대학교 석사학위논문
  8. 김은영, 2003, 김은영 매듭, 문성원색
  9. 김은영.김혜순, 2001, 매듭, 삼정인쇄공사
  10. 김희진, 2008, 아름다운 우리매듭, 그라픽네트
  11. 김희진, 1974, 每緝과 多會 - 매듭과 끈목 -, 광명출판사, p.4
  12. 민승기, 2004, 조선의 무기와 갑옷, 가람기획
  13. 박윤미, 2015a, 전통 다회 직기의 형태와 구조에 관한 연구 한복문화 제18권 2호, 한복문화학회
  14. 박윤미, 2015b, 일본에 전래된 다회에 관한 연구 한복문화 제18권 3호, 한복문화학회
  15. 박진영, 2010, 조선시대 공신화상 유소 연구, 용인대학교 대학원 석사학위논문
  16. 백지선, 2017, 조선시대 도검 패용 광다회의 제작기법 분석 및 복원, 한국전통문화대학교 석사학위논문, pp.14-16
  17. 백지선.정광용, 2015, 오색교사(五色交絲) 제작기법의 복원 연구 조형디자인연구 V.18 N.4, 한국조형디자인학회, p.318
  18. 육군박물관, 2013, 조선의 도검, 충을 벼루다, 디자인포스, p.48, 108
  19. 임금희.조우현, 2009, 고려조 기법의 조선시대 광다회 복원 고찰 한국복식학회 59권 6호
  20. 임금희, 2008, 조선시대 능조직 광다회의 복원적 연구 :신라조.고려조 기법을 중심으로, 성균관대학교 석사학위논문
  21. 최연우.박윤미.김명이, 2016, 조선시대 왕실 예복에 사용된 다회(多繪) 및 망수(網綬) 연구 한국복식학회지 66권 5호, 한국복식학회