A Review of Outgassing and Methods for its Reduction

  • 투고 : 2017.06.26
  • 심사 : 2017.08.31
  • 발행 : 2017.09.30


There are several contributions to the gas load of a system of which often the most important is outgassing. Adsorption occurs via two main processes, physisorption and chemisorption, and can be described using five (or six) classifying isotherms. Outgassing is the result of desorption of previously adsorbed molecules, bulk diffusion, permeation and vapourisation. Looking at the desorption rate, pumping speed and readsorption on surfaces, the net outgassing of the system can be calculated. There is significant variation in measured outgassing rates between different materials but also between published rates for the same materials, in part due to the number of different methods used to measure outgassing. This article aims to review the outgassing process, outgassing rates, measurement methods and techniques that can be used to reduce the outgassing of a system.


  1. A. Roth, Vacuum Technology, Third Edition, Elsevier, North Holland (2012).
  2. National Aeronautics and Space Administration, Outgassing Data for Selecting Spacecraft materials, (2008-2016).
  3. J. L. De Segovia, Physics of Outgassing, No. OPEN-2000-273. CERN, (1999).
  4. J. M. Lafferty, Foundations of Vacuum Science and Technology, John Wiley & Sons, Inc. (1998).
  5. R. N. Nix, An Introduction to Surface Chemistry, (2012).
  6. K. S. W. Sing, Reporting Physisorption Data for gas/solid systems with special reference to the determination of surface area and porosity, Pure and Applied Chemistry 54.11 (1982), 2201-2218.
  7. I. Langmuir, The Constitution and Fundamental Properties of Solids and Liquids. Part I. Solids, Journal of the American Chemical Society 38.11 (1916): 2221-2295.
  8. J. H. De Boer, The Dynamical Character of Adsorption, Oxford University Press (1953).
  9. R. J. Elsey, Outgassing of Vacuum Materials-I, Vacuum 25.7 (1975): 299-306.
  10. S. Brunauer, and P. H. Emmett, E. Teller, Adsorption of Gases in Multimolecular Layers, Journal of the American Chemical Society 60.2 (1938): 309-319.
  11. K. Jousten, Thermal Outgassing, No. OPEN-2000-274, CERN (1999).
  12. S. Brunauer et al., On a Theory of the Van der Waals Adsorption of Gases, Journal of the American Chemical Society 62.7 (1940): 1723-1732.
  13. P. A. Redhead, Recommended practices for Measuring and Reporting outgassing Data, Journal of Vacuum Science & Technology A, 20.5 (2002): 1667-1675.
  14. G. Vandoni, Mesures de Degazage, 2eme Rencontre du reseau "vide" du CNRS (2012).
  15. P. A. Redhead, Effects of Readsorption on Outgassing Rate Measurements, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 14.4 (1996): 2599-2609.
  16. R. J. Elsey, Outgassing of vacuum materials-II, Vacuum 25.8 (1975): 347-361.
  17. B. S. Halliday, An Introduction to Materials for use in Vacuum, Vacuum 37.8 (1987): 583-585.
  18. S. Avdiaj, B. Erjavec, Outgassing of Hydrogen from a Stainless Steel Vacuum Chamber, Materiali in Tehnologije 46.2 (2012): 161-167.
  19. Y. T. Sasaki, A Survey of Vacuum Materiel Cleaning Procedures: A Subcommittee Report of the American Vacuum Society Recommended Practices Committee, Journal of Vacuum Science & Technology A 9.3 (1991): 2025-2035.
  20. A. Chambers, Modern Vacuum Physics, CRC Press (2004).
  21. R. J. Reid, Cleaning for Vacuum Service, CERN European Organization for Nuclear Research Reports (1999): 139-154.
  22. E. Hoyt, Effect of Surface Treatment and Baking on the Outgassing Characteristics of 304 Stainless Steel Pipe, SLAC-TN-64-005 (1964).
  23. S. A. Hoenig, Cleaning Surfaces With Dry Ice, Compressed Air Magazine 91.8 (1986): 22-25
  24. R. Sherman, Surface Cleaning with the Carbon Dioxide Snow Jet, Journal of Vacuum Science & Technology A 12.4 (1994): 1876-1881.
  25. M. H. Grunze, H. Ruppender, O. Elshazly, Chemical Cleaning of Metal Surfaces in Vacuum Systems by Exposure to Reactive Gases, Journal of Vacuum Science & Technology A 6.3 (1988): 1266-1275.
  26. J. Swain, The "Then and Now'" of Electropolishing, Surface World 3036 (2010).
  27. J. F. O'Hanlon, A User's Guide to Vacuum Technology, John Wiley & Sons (2005).
  28. P. Chiggiato, Thermal Outgassing of Hydrogen: Models and Methods for Reduction, Coatings, Chemistry and Surfaces, CERN (2006).
  29. C. Benvenuti et al., Non Evaporable Getter Films for Ultrahigh Vacuum Applications, Journal of Vacuum Science & Technology A 16.1 (1998): 148-154.
  30. C. Benvenuti et al., A Novel Route to Extreme Vacua: the Non-Evaporable Getter Thin Film Coatings, Vacuum 53.1 (1999): 219-225.
  31. K. Odaka, Y. Ishikawa, M. Furose, Effect of Baking Temperature and Air Exposure on the Outgassing Rate of Type 316L Stainless Steel, Journal of Vacuum Science & Technology A 5.5 (1987): 2902-2906.
  32. H. C. Hseuh, X. Cui, Outgassing and Desorption of the Stainless Steel Beam Tubes After Different Degassing Treatments, Journal of Vacuum Science & Technology A 7.3 (1989): 2418-2422.
  33. G. F. Weston, Ultrahigh Vacuum Practice, Elsevier (2013).
  34. H. F. Dylla, Introduction to Vacuum Science and Technology, CERN Accelerator School, (2006).
  35. P. Chiggiato, Outgassing of Vacuum Materials and its Reduction, (2004).
  36. G. P. Beukema, Cursus Vacuumtechnologie, (2016).
  37. H. F. Dylla, D. M. Manos, and P. H. LaMarche, Correlation of outgassing of Stainless Steel and Aluminium with Various Surface Treatments, Journal of Vacuum Science & Technology 11.5 (1993): 2623-2636.
  38. A. Schram, La Desorption Sous Vide, Le Vide 103 (1963): 55-68.
  39. R. S. Barton, and R. P. Govier, Some Observations on the outgassing of Stainless Steel Following Different methods of Cleaning, No. CLM-R--93 United Kingdom atomic Energy Authority, Culham Lab (1968).
  40. N. Marquardt, Introduction to the Principles of Vacuum Physics, CERN European Organization for Nuclear Research Reports (1999): 1-24.
  41. J. A. Eichmeier, and M. Thumm, Vacuum Electronics: Components and Devices, Springer Science & Business Media (2008).
  42. J. Blears, and E. J. Greer, J. Nightingale, Advances in Vacuum Science and Technology, (1960): 473.
  43. D. J. Santeler, 5th National Symposium on Vacuum Technology Transactions (1959) 1.
  44. B. B. Dayton, 6th National Symposium on Vacuum Technology Transactions (1960) 101.
  45. R. D. Brown, Outgassing of Epoxy Resins in vacuum, Vacuum 17.9 (1967): 505-509.
  46. Das, AF 49 (600)-923 (1961).
  47. ISO/TC 112/SC N, Vacuum Technology-Vacuum Gauges- Procedures to Measure and Report Outgassing Rates, ISO/PDTS 20177.5 Working Draft (2016).
  48. M. D. Donohue, and G. L Aranovich, A New Classification of Isotherms for Gibbs Adsorption of Gases on Solids, Fluid Phase Equilibria 158 (1999): 557-563.
  49. M. Arbab, and J. B. Hudson, The Influence of Desorption Kinetics on Hydrogen Permeation in Iron, Applied Surface Science 29.1 (1987): 1-19.
  50. B. M. Shipilevsky, and V. G. Glebovsky, Competition of Bulk and Surface Processes in the Kinetics of Hydrogen and Nitrogen Evolution from Metals Into Vacuum, Surface Science 216.3 (1989): 509-527.
  51. J. M. Lafferty, Foundations of Vacuum Science and Technology, John Wiley & Sons, Inc. (1998).
  52. R. N. Peacock, Practical Selection of Elastomer Materials for Vacuum Seals, Journal of Vacuum Science & Technology 17.1 (1980): 300-336.
  53. M. H. Hablanian, High-Vacuum Technology: a Practical Guide, Vol. 111 CRC Press (1997).
  54. C. Benvenuti et al., Vacuum Properties of Palladium Thin Film Coatings, Vacuum 73.2 (2004): 139-144.
  55. C. Benvenuti, Non-Evaporable Getters: from Pumping Strips to Thin Film Coatings, EPASC Vol. 98 (1998).

피인용 문헌

  1. Study of Ultra-High-Vacuum Properties of Carbon-Coated Stainless Steel Beam Pipes for High-Energy Particle Accelerators pp.2191-4281, 2019,