- Volume 12 Issue 5
DOI QR Code
Output Voltage Characteristics of HVDC Electric Field Mill Sensor for Different Speed Variables of Rotating Electrode
- Kim, Young Sun (Dept. of Electrical and Electronic Engineering, Joongbu University) ;
- Park, Jae Jun (Dept. of Electrical and Electronic Engineering, Joongbu University)
- 투고 : 2017.01.30
- 심사 : 2017.03.10
- 발행 : 2017.09.01
This paper explains the effects of the weak signal of a rotating-type electric field mill sensor fabricated for measuring the intensity of the electric field generated by high-voltage direct current (HVDC) power transmission lines. The fabricated field mill consists of two isolated electrode vanes, a motor driver, and a ground part. The sensor plate is exposed to and shielded from the electric field by means of a rotary shutter consisting of a motor-driven mechanically complementary rotor/stator pair. When the uncharged sensor plate is exposed to an electric field, it becomes charged. The rotating electrode consists of several conductive vanes and is connected to the ground part, so that it is shielded. Determining the appropriate design variables such as the speed of the vane, its shape, and the distance between the two electrodes, is essential for ensuring optimal performance. By varying the speed, the weak signal characteristics which is used to signal processing and calibration experiment are quite different. Each weak signal pattern was analyzed along with the output voltage characteristics, in order to be able to determine the intensity of the electric field generated by HVDC power transmission lines with accuracy.
Field mill;HVDC;Rotating electrode;Power transmission line;Signal processing
연구 과제 주관 기관 : Korea Electric Power Corporation
- S. G. Gathman, "Guarded double field meter," Rev. Sci. Instrum., vol. 39, no. 1, pp. 43-47, 1968. https://doi.org/10.1063/1.1683107
- J. N. Chunn, "Two new designs of field mill type fieldmeters not requiring earthing of rotating chopper," IEEE Trans. Ins. Appl., vol. 26, no. 6, pp. 1178-1181, 1990. https://doi.org/10.1109/28.62405
- M. G. Bateman, M. F. Stewart, R. J. Blakeslee, S. J. Christian, D. M. Mach, J. C. Bailey, and D. Daskar, "A low-noise, microprocessor-controlled, internally digitizing rotating-vane electric field mill for airborne platforms," J. Atmos. Oceanic Technol., vol. 24, pp. 1245-1255, Jul. 2007. https://doi.org/10.1175/JTECH2039.1
- Boltek Corporation, EFM-100 Atmospheric Electric Field Monitor Installation/Operations Guide, ON, Canada, 2014.
- Global Atmospherics, Inc., Electric Field Mill II User's Guide, Ver. 1.2, USA, 2000.
- Mission Instruments, Electric Field Mill Operation, AZ, USA, 2014.
- R. L. Boylestad and L. Nashelsky, Electronic Devices and Circuit Theory, New Jersey, Ohio, USA, Prentice Hall, 2013.