# A New method for the Calculation of Leakage Reactance in Power Transformers

• Dawood, Kamran (Engineering Faculty, Dept. of Electrical Engineering, Kocaeli University) ;
• Alboyaci, Bora (Engineering Faculty, Dept. of Electrical, Kocaeli University) ;
• Cinar, Mehmet Aytac (Izmit Vocational School, Kocaeli University) ;
• Sonmez, Olus (Sonmez Transformer Company)
• 투고 : 2017.03.06
• 심사 : 2017.05.20
• 발행 : 2017.09.01
• 102 7

#### 초록

Transformers are one of the most precious elements of the electric power system. Stability and reliability of the electric power network mainly depend on the working of the transformer. Leakage reactance of the transformer is one of the important factors and accurate calculation of the leakage reactance is necessary for the transformer designers and electric distributors. Leakage reactance of the transformer depends on the geometry of the transformer. There are many different methods for the calculations of the leakage reactance however mostly are usable when the axial heights of the high voltage and low voltage windings are equal. When the axial heights of high voltage and low voltage windings are asymmetric most of the analytical methods are not reliable. In this study, a new analytical method is introduced for the calculation of the leakage reactance. Fourteen different transformers are investigated in this study and four of them are presented in this paper. The results of the new analytical method are compared with the experimental results. Other analytical and numerical methods are also compared with this new method. Results show that this method is more reliable and accurate as compared to the other analytical methods. The maximum relative error between short-circuit test and proposed method for these fourteen transformers was less than 2.8%.

#### 키워드

Energy method;Finite element method;Leakage reactance;Transformer

#### 과제정보

연구 과제 주관 기관 : Sonmez Transformer Company (STS) of Turkey

#### 참고문헌

1. Cinar, Mehmet Aytac, Bora Alboyaci, and Mehlika Sengul, "Comparison of Power Loss and Magnetic Flux Distribution in Octagonal Wound Transformer Core Configurations," Journal of Electrical Engineering and Technology, vol. 19, no. 4, pp. 1290-1295, 2014.
2. Naderian Jahromi, Jawad Faiz and Hossein Mohseni, "A Fast Method for Calculation of Transformers Leakage Reactance using Energy Technique," IJE Transactions B, vol. 16, no. 1, pp. 41, April 2003.
3. D. J. Wilcox, W. G. Hurley, and M. Conlon, "Calculation of self and mutual impedances between section of transformer windings," IEE Proceedings C-Generation, Transmission and Distribution, vol. 136, no. 5, pp. 308-314, September 1989. https://doi.org/10.1049/ip-c.1989.0041
4. De Leon, Francisco, and Adam Semlyen, "Efficient calculation of elementary parameters of transformers," IEEE Transactions on Power Delivery, vol. 7, no. 1, pp. 376-383, 1992. https://doi.org/10.1109/61.108931
5. Karsai, Karoly, Denes Kerenyi, and Laszlo Kiss, Large power transformers: 1987.
6. Shrikrishna V. Kulkarni, and S. A. Khaparde, Transformer engineering: design and practice: CRC Press, 2004.
7. Malcolm. Waters, The Short-circuit Strength of Power Transformers:[With Illustrations.]. Macdonald, 1966.
8. L Rabins, "Transformer reactance calculations with digital computers," Transactions of the American Institute of Electrical Engineers, Part I: Communication and Electronics, vol. 75, no. 3, pp. 261-267, 1956.
9. Peter P. Silvester and Ronald L. Ferrari, Finite elements for electrical engineers: Cambridge University Press, New York, 1990.
10. Shima, Kazuo, Kazumasa Ide, and Miyoshi Takahashi, "Finite-element calculation of leakage inductances of a saturated salient-pole synchronous machine with damper circuits," IEEE Transactions on Energy Conversion, vol. 17, no. 4, pp. 463-470, (2002). https://doi.org/10.1109/TEC.2002.805219
11. Branislaw Tomczuk, "Analysis of 3-D Magnetic Fields in High Leakage Reactance Transformers," IEEE Transaction on Magnetics, vol. 3, no. 5, pp. 2734-2738, September 1994.
12. J. A. Guemes Alonso, "A New Method for Calculating of Leakage Reactances and Iron Losses in Transformers," 5th International Conference on Electrical Machines and Systems, vol. 1, pp. 178-181, Aug. 2001.
13. Bronislaw Tomczuk, "Three-Dimensional Leakage Reactance Calculation and Magnetic Field Analysis for Unbounded Problems," IEEE Transaction On Magnetic, vol. 28, no. 4, July 1992.
14. Singiresu S. Rao, The finite element method in engineering: Elsevier, 2010.
15. A. M. Kashtiban, A. R. Milani, and M. T. Haque, "Finite element calculation of winding type effect on leakage flux in single phase shell type transformers," Proc. 5th WSEAS International Conference on Applications of Electrical Engineering, pp. 2249-0604, 2015.
16. Indrajit Dasgupta, Power Transformer Quality Assurance: New Age International, 2009.
17. Saadat Jamali Arand, Karim Abbaszadeh, "The Study of Magnetic Flux Shunts Effects on the Leakage Reactance of Transformers via FEM," Majlesi Journal of Electrical Engineering, vol. 4, no. 3, September 2010.
18. Shon, Chae-Hwa; Yi, Sang-Hwa; Lee, Heun-Jin; Kang, Dong-Sik, "Study on the transfer functions for detecting windings displacement of power transformers with impulse method," Journal of Electrical Engineering and Technology, vol. 7, no. 6, pp. 876-883, 2012. https://doi.org/10.5370/JEET.2012.7.6.876