DOI QR코드

DOI QR Code

국내 재활용품 선별시설에서 선별 현황 및 개선방안

Investigation on Sorting Efficiency for Recyclable Materials and Its Improvement Measure at Domestic Sorting Facility

  • 김주신 (서울과학기술대학교 에너지환경대학원 에너지환경공학과) ;
  • 박대원 (서울과학기술대학교 에너지환경대학원 에너지환경공학과)
  • Kim, Joo-Sin (Graduate School of Energy and Environment, Seoul National University of Science and Technology) ;
  • Pak, Daewon (Graduate School of Energy and Environment, Seoul National University of Science and Technology)
  • 투고 : 2017.04.07
  • 심사 : 2017.04.28
  • 발행 : 2017.06.30

초록

본 연구는 S시 S구의 재활용품 배출특성을 조사 및 분석을 통해 재활용품 선별장에서 재활용품 선별율을 조사하였다. 재활용품 배출특성을 조사하기 위해서 발생원, 수집운반, 선별단계별로 나누어 분석하였다. 분석결과, 재활용품의 발생량 원단위의 전체 평균은 0.121kg/일 인, 지역별 재활용품의 수거주기는 보통 주3회(월수금 혹은 화목일)로 나타났으며, 차량별 혼합재활용품의 밀도는 평균 $202.4kg/m^3$로 나타났다. 선별단계에서의 현황분석을 진행한 결과, 혼합재활용품의 반입량은 평균 1,154.6톤/달, 겉보기밀도의 평균은 $181kg/m^3$, 선별재활용품의 양은 평균 448.5kg/달, 잔재물의 밀도는 $48kg/m^3$으로 나타났다. 선별장으로 입고된 혼합재활용품에서 유가품 선별율은 약 38.85%이며 잔재물은 약 55.90%로 나타났다. 전체 잔재물 7,744.8톤 중 유가품은 약 4,272.1톤이 존재하는 것으로 나타났다. 활용가능한 유가품의 수거효율을 높이기 위한 방안으로는 거점수거 활성화, 선별시설 자동화 및 현대화, 잔재물의 자원화 등이 검토되었다.

참고문헌

  1. Ministry of Environment, "2015 Waste Treatment Facility Installation and Operation Status Report". (2016).
  2. Korea Zero Waste Movement Network, "A manual for the operation and management of the recycling materials collection hall of the local government". (2009).
  3. Ministry of the Interior, "Resident registration Statistics", Ministry of The Interior. (2014).
  4. Ministry of Environment, "Waste Statistics Survey", Ministry of Environment. (2013).
  5. K-eco, "The 4th national waste statistics survey design study". (2011).
  6. Yeon, K. S., "Evaluation and Improvement of Material Recovery Facilities for Source Separated Recyclable Wastes", University of Seoul, Master's Dissertation in Korea. (2004).
  7. Jeon, D. R. et al., "Extension Measures of Separate Collection on Recyclable Materials in Domestic Waste", Journal of Environmental Policy and Administration. (2011).
  8. Joao, T. et al., "Recyclable waste collection planning - a case study", European Journal of Operational Research. (2004).
  9. Choi, W. J. et al., "A Study on Physical Properties of Recyclables obtained from MSW", Journal of The Korean Institute of Resources Recycling. (2012).
  10. Ciprian, C. et al., "Central sorting and recovery of MSW recyclable materials: A review of technological state-of-the-art, cases, practice and implications for materials recycling", Journal of Environment Management. (2015).
  11. Sathish P. G. et al., "A review on automated sorting of source-separated municipal solid waste for recycling", Waste Management. (2016).
  12. Martina M. et al., "Implementing an advanced waste separation step in an MBT plant: assessment of technical, economic and environmental impacts", Waste Management & Research. (2013).
  13. Yusuke, H. et al., "Sensing performance of dielectric sensor in mixed melting polymer pellets for waste plastic separation", Advanced Powder Technology. (2015).
  14. Giuseppe B. et al., "Gravity packaging final waste recovery based on gravity saparation and chemical imaging control, Waste Management. (2016).
  15. Kim, H. Y. et al., "The Present Status and Suggestions for Waste Recycling and Reuse", Journal of Nakdong River Environmental Research Institute. (2012).
  16. Oh, J. I. et al., "Realization of Zero Waste Clean City to Low Carbon Green Growth", Journal of Korea Society of Environmental Engineers. (2010).
  17. Shin, T.-S. et al., "Feasibility Evaluation of Co-Incineration with MSW for Efficient Recycling of the Rejects after Separation Processes in MRF", Journal of Korea Society of Environmental Engineers. (2011).
  18. Jun H., "Suitable Methods of Waste Separation", Advanced Materials Research. (2013).