- Volume 19 Issue 5
DOI QR Code
Application of steel equivalent constitutive model for predicting seismic behavior of steel frame
- Wang, Meng (School of Civil Engineering, Beijing Jiaotong University) ;
- Shi, Yongjiu (Department of Civil Engineering, Tsinghua University) ;
- Wang, Yuanqing (Department of Civil Engineering, Tsinghua University)
- Received : 2014.02.16
- Accepted : 2015.06.24
- Published : 2015.11.25
In order to investigate the accuracy and applicability of steel equivalent constitutive model, the calculated results were compared with typical tests of steel frames under static and dynamic loading patterns firstly. Secondly, four widely used models for time history analysis of steel frames were compared to discuss the applicability and efficiency of different methods, including shell element model, multi-scale model, equivalent constitutive model (ECM) and traditional beam element model (especially bilinear model). Four-story steel frame models of above-mentioned finite element methods were established. The structural deformation, failure modes and the computational efficiency of different models were compared. Finally, the equivalent constitutive model was applied in seismic incremental dynamic analysis of a ten-floor steel frame and compared with the cyclic hardening model without considering damage and degradation. Meanwhile, the effects of damage and degradation on the seismic performance of steel frame were discussed in depth. The analysis results showed that: damages would lead to larger deformations. Therefore, when the calculated results of steel structures subjected to rare earthquake without considering damage were close to the collapse limit, the actual story drift of structure might already exceed the limit, leading to a certain security risk. ECM could simulate the damage and degradation behaviors of steel structures more accurately, and improve the calculation accuracy of traditional beam element model with acceptable computational efficiency.
Supported by : National Natural Science Foundation, Beijing Natural Science Foundation, Central Universities
- ABAQUS (2009), "Analysis user's manual I_V. Version 6.9", ABAQUS, Inc., Dassault Systemes, USA.
- Ballio, G., Calado, L. and Castiglioni, C.A. (1997), "Low cycle fatigue behaviour of structural steel members and connections", Fatig. Fract. Eng. Mater. Struct., 20(8), 1129-1146. https://doi.org/10.1111/j.1460-2695.1997.tb00318.x
- Castiglioni, C.A. and Pucinotti, R. (2009), "Failure criteria and cumulative damage models for steel components under cyclic loading", J. Construct. Steel Res., 65(4), 751-765. https://doi.org/10.1016/j.jcsr.2008.12.007
- Guo, B., Guo, Y.L. and Liu, F. (2006), "Research on cyclic behavior of welded and bolted steel frames", J. Build. Struct., 27(2), 47-56.
- Li, G.Q. and Feng, J. (2000), "A practical approach for estimating elasto-plastic displacements of multistory and tall steel buildings under severe earthquakes", J. Build. Struct., 21(1), 77-83.
- Li, H.Q., Ben, Q.G., Yu, Z.H., Zhang, Y.Q. and Lu, X.L. (2004), "Analysis and experiment of cumulated damage of steel frame structures under earthquake action", J. Build. Struct., 25(3), 69-74.
- Li, Z.X., Sun, Z.H., Guo, L., Chan, H.T. and Yu, Y. (2007), "Concurrent multi-scale modeling of structures and damage analyses", J. Southeast Univ. (Natural Science Ed.), 37(2), 251-260.
- Liu, Y.H. and Zhang, Y.C. (2006), "Refined plastic hinge analysis of spatial steel frames", Eng. Mech., 23(sup. I), 108-116.
- Kim, S.E., Lee, D.H. and Cuong, N.H. (2007), "Shaking table tests of a two-story un-braced steel frame", J. Construct. Steel Res., 63(3), 412-421. https://doi.org/10.1016/j.jcsr.2006.04.009
- Krawinkler, H. and Zareian, F. (2007), "Predication of collapse-how realistic and practical is it and what can we learn from it?", Struct. Des. Tall Special Build., 16(5), 633-653. https://doi.org/10.1002/tal.433
- Kuo, W.L., Yi, K.W. and Foutch, D.A. (2007), "Evaluation of 3D steel moment frames under earthquake excitations. I: Modeling", J. Struct. Eng., 133(3), 462-470. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:3(462)
- Ministry of Housing and Urban-Rural Development of the People's Republic of China (2010), GB50011-2010 Code for Seismic Design of Buildings; Beijing, China Architecture & Building Press.
- Ministry of Housing and Urban-Rural Development of the People's Republic of China (1997), JGJ 101-96 Specificating of Testing Methods for Earthquake Resistant Building; Beijing, China Architecture & Building Press.
- Motohide, T., Makoto, O., Satoshi, Y., Shojiro, M. and Kazuhiko, K. (2007), "E-defense tests on full-scale steel buildings Part 3 - Analytical simulation of collapse", Proceedings of ASCE Structures Congress, Long Beach, CA, USA, May.
- Ricles, J.M., Mao, C.S., Lu, L.W. and Fisher, J. (2002), "Inelastic cyclic testing of welded unreinforced moment connections", J. Struct. Eng., 128(4), 429-440. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(429)
- Saatcioglu, M. and Humar, J. (2003), "Dynamic analysis of buildings for earthquake resistant design", Can. J. Civil Eng., 30(2), 338-359. https://doi.org/10.1139/l02-108
- Shi, Y.J., Wang, M. and Wang, Y.Q. (2011a), "Experimental and constitutive model study of structural steel under cyclic loading", J. Construct. Steel Res., 67(8), 1185-1197. https://doi.org/10.1016/j.jcsr.2011.02.011
- Shi, Y.J., Wang, M. and Wang, Y.Q. (2011b), "Seismic behavior analysis of steel frame by multi-scale calculation method", Eng. Mech., 28(12), 20-26.
- Sivaselvan, M.V. and Reinhorn, A.M. (2000), "Hysteretic models for deteriorating inelastic structures", J. Eng. Mech., 126(6), 633-640. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:6(633)
- Victor, I.F. and Ernesto, F.C. (2006), "Parametric study of the non-linear seismic response of threedimensional building models", Eng. Struct., 28(5), 756-770. https://doi.org/10.1016/j.engstruct.2005.10.007
- Wang, W., Zhang, Y.Y., Chen, Y.Y., Lu, Z.H. and Yan, P. (2011), "Improving seismic performance of steel moment connections with noncompact beam web", Proceedings of the 6th International Symposium on Steel Structures, Seoul, Korea, November, pp. 517-522.
- Wang, M., Shi, Y.J. and Wang, Y.Q. (2012a), "Effect of damage and degradation on steel frame seismic behaviors under severe earthquake", J. Build. Struct., 33(10), 94-101.
- Wang, M., Shi, Y.J. and Wang, Y.Q. (2012b), "Equivalent constitutive model of steel with cumulative degradation and damage", J. Construct. Steel Res., 79(10), 101-114. https://doi.org/10.1016/j.jcsr.2012.07.028