DOI QR코드

DOI QR Code

Convergence Technique Study through CAE due to the Shape of Lift for Car

차량용 리프트의 형상에 따른 CAE를 통한 융합 기술 연구

  • Received : 2015.08.03
  • Accepted : 2015.10.20
  • Published : 2015.10.31

Abstract

Nowadays, one lift among the fundamental equipments at auto-repair must withstand the heavy weight of car. Therefore, the strong lift which is easy to make repairs on cars is the indispensible equipment. In this study, three kinds of lifts are modelled and the simulation analysis is carried out with the finite element analysis program of ANSYS. The durability of lifts due to each configuration can be estimated on the background of this study result and the data to be contributed to the development of new lift for car with safety and durability can be accumulated ultimately. And it is possible to be grafted onto the convergence technique at design and show the esthetic sense.

Keywords

Lift;Shape;Structural analysis;Durability design;Convergence technique

References

  1. C. Z. Jin, K. K. Jin, S. K. Ha, H. S. Seo, I. S. Yoon, "Structure Analysis and Design Optimization of Stiffeners in LNG Tanks", Journal of the Korean Society of Mechanical Engineers, Vol. 36, No. 3, pp. 325-330, 2012.
  2. S. S. Kang. J. H. Lee, "Evaluation of Fatigue Life and Structural Analysis for Dish-Type and Spoke-Type Automobile Wheels", Journal of the Korean Society of Mechanical Engineers, Vol. 35, No. 10, pp. 1315-1321, 2011. https://doi.org/10.3795/KSME-A.2011.35.10.1315
  3. D. H. Choi, K. H. Lee, "Structural Analysis and Optimization of a Pedestal for Deck Crane", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 95-100, 2012.
  4. Y. J. Jang, J. H. Lee, K. W. Kang, "Structural Integrity of Small Wind Turbine Composite Blade Using Structural Test and Finite Element Analysis", Journal of the Korean Society Mechanical Engineers, Vol. 36, No. 9, pp. 1087-1094, 2012. https://doi.org/10.3795/KSME-A.2012.36.9.1087
  5. M. S. Han, J. U. Cho, "Structural Analysis on Flange Coupling due to Change of Bolt Numbers", Journal of the Korean Society Manufacturing Process Engineers, Vol. 12, No. 5, pp. 57-66, 2013.
  6. J. S. Moon, J. W. Kim, J. C. Shin, M. S. Kim, "Reliability Estimation of Door Hinge for Home Appliances", Journal of the Korean Society of Mechanical Engineers, Vol. 29, No. 5, pp. 689-697, 2005. https://doi.org/10.3795/KSME-A.2005.29.5.689
  7. J. U. Cho, M. S. Han, "Structural Durability Analysis Related to Shape and Direction of Bicycle Frames", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 6, No. 22, pp. 969-975, 2013.
  8. H. K. Choi, J. U. Cho, "Structural Analysis on the Fracture of Bonded Double Cantilever Beam Model", Jou. of Korean Society of Mechanical Technology, Vol. 14, No. 4, pp. 41-47, 2012.
  9. J. U. Cho, M. S. Han, "Structural Durability Analysis According to the Thickness of Bicycle Frame Tube", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 122-129, 2012.
  10. M. S. Han, J. U. Cho, "Structural Analysis for Bicycle Frame by Type", Journal of the Korean Society of Automotive Engineers, Vol. 20, No. 6, pp. 146-155, 2012. https://doi.org/10.7467/KSAE.2012.20.6.146
  11. C. W. Han, C. M. Oh, W. S. Hong, "Stress Analysis for Bendable Electronic Module Under Thermal-Hygroscopic Complex Loads", Journal of the Korean Society of Mechanical Engineers, Vol. 37, No. 5, pp. 619-624, 2013. https://doi.org/10.3795/KSME-A.2013.37.5.619
  12. M. S. Han, J. U. Cho, "Structural and Fatigue Analysis on Shock Absorber Mount of Automobile", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 125-133, 2012.
  13. M. S. Han, J. U. Cho, "Structural Strength Analysis of ATV Knuckle", Journal of the Korean Society of Automotive Engineers, Vol. 21, No. 1, pp. 137-144, 2013. https://doi.org/10.7467/KSAE.2013.21.1.137
  14. J. W. Hur, "Study on Fatigue Life Estimation for Aircraft Engine Support Structure", Journal of the Korean Society of Mechanical Engineers, Vol. 34, No. 11, pp. 1667-1674, 2010. https://doi.org/10.3795/KSME-A.2010.34.11.1667
  15. J. U. Cho, M. S. Han, "A Study on Fatigue Analysis of Automotive Shock Absorber", Transactions of the Korean Society of Machine Tool Engineers, Vol. 17, No. 1, pp. 92-97, 2008.
  16. I. S. Son, C. H. Kim, S. H. Bae, J. Y. Lee, "Rescue Lift Development Using Structural Analysis", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 111-116, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.111
  17. D. S. Choi, "Structural Analysis and Design of Small Wind Turbine Blade", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 85-91, 2015.