DOI QR코드

DOI QR Code

Status and Direction of Development on the 3D Printing Technology for BRP(Building Rapid Printing)

건축물 신속조형을 위한 3D 프린터 기술 현황 및 개발방향

  • Kim, Dong-Hyun (Department of Architecture, Sejong University) ;
  • Lee, Jae-Hong (Department of Architectural Engineering, Sejong University)
  • Received : 2015.06.16
  • Accepted : 2015.07.27
  • Published : 2015.09.15

Abstract

A study on BRP(Building Rapid Printing) technology is in an initial stage although general 3d printers are being developed in a great speed and with fruitful outputs. Even some laboratories in advanced countries have difficulties in their research due to many technological restrictions and have not produced a practical output yet. This paper proposed distinct directions in which the research of this aera should be developed and this manifested four areas - printing speed, reinforcing tech, material tech and nozzle tech and those areas were proposed with concrete development alternatives and objects.

Acknowledgement

Supported by : 국토교통부

References

  1. S.K. Choi, "3D Printing Technology and Architectural Application", Architecture, Vol.58, No.02, pp.17-25, 2014
  2. Development direction of 3D printer industry, Ministry of Science, ICT and Future Planning, 2014
  3. http://3dprintcanalhouse.com
  4. J.G. Lee, J.H. Park, B.H. Cho, "Structural Performance Tests of Slab Systems for Modular Building Structures", Journal of Architectural Institute of Korea, Vol. 25, No. 2, pp.19-28, 2009
  5. Lim, Sungwoo, et al. "Developments in construction-scale additive manufacturing processes." Automation in construction 21, pp.262-268, 2012 https://doi.org/10.1016/j.autcon.2011.06.010
  6. http://www.yhbm.com/
  7. http://www.contourcrafting.org/
  8. Khoshnevis, Behrokh, et al. "Lunar contour crafting-a novel technique for ISRU-based habitat development." 43rd AIAA Aerospace Sciences Meeting and Exhibit-Meeting Papers. 2005.
  9. http://www.d-shape.com/
  10. Cesaretti, Giovanni, et al. "Building components for an outpost on the lunar soil by means of a novel 3D printing technology." Acta Astronautica 93, pp.430-450, 2014 https://doi.org/10.1016/j.actaastro.2013.07.034
  11. http://www.buildfreeform.com/
  12. Le, Thanh T., et al. "Mix design and fresh properties for high-performance printing concrete." Materials and structures 45.8, pp.1221-1232, 2012 https://doi.org/10.1617/s11527-012-9828-z
  13. Le, Thanh T., et al. "Hardened properties of high-performance printing concrete." Cement and Concrete Research 42.3, pp.558-566, 2012 https://doi.org/10.1016/j.cemconres.2011.12.003