DOI QR코드

DOI QR Code

Detection of onset of failure in prestressed strands by cluster analysis of acoustic emissions

  • Ercolino, Marianna (Department of Structures for Engineering and Architecture, University of Naples Federico II) ;
  • Farhidzadeh, Alireza (Mistras Group Inc.) ;
  • Salamone, Salvatore (Department of Civil, Architectural and Environmental Engineering, University of Texas at Austin) ;
  • Magliulo, Gennaro (Department of Structures for Engineering and Architecture, University of Naples Federico II)
  • 투고 : 2014.11.26
  • 심사 : 2015.07.25
  • 발행 : 2015.12.25

초록

Corrosion of prestressed concrete structures is one of the main challenges that engineers face today. In response to this national need, this paper presents the results of a long-term project that aims at developing a structural health monitoring (SHM) technology for the nondestructive evaluation of prestressed structures. In this paper, the use of permanently installed low profile piezoelectric transducers (PZT) is proposed in order to record the acoustic emissions (AE) along the length of the strand. The results of an accelerated corrosion test are presented and k-means clustering is applied via principal component analysis (PCA) of AE features to provide an accurate diagnosis of the strand health. The proposed approach shows good correlation between acoustic emissions features and strand failure. Moreover, a clustering technique for the identification of false alarms is proposed.

키워드

corrosion;acoustic emission;principal component analysis;k-means method

참고문헌

  1. ElBatanouny, M.K., Larosche, A., Mazzoleni, P., Ziehl, P.H., Matta, F. and Zappa, E. (2014a), "Identification of cracking mechanisms in scaled FRP reinforced concrete beams using acoustic emission", Exp Mech, 54(1), 69-82. DOI 10.1007/s11340-012-9692-3 https://doi.org/10.1007/s11340-012-9692-3
  2. ElBatanouny, M.K., Mangual, J., Ziehl, P.H. and Matta, F. (2014b), "Early corrosion detection in prestressed concrete girders using acoustic emission", J. Mater. Civil Eng. 26(3), 504-511. doi:10.1061/(ASCE)MT.1943-5533.0000845 https://doi.org/10.1061/(ASCE)MT.1943-5533.0000845
  3. Elfergani, H.A., Pullin, R. and Holford, K.M. (2013), "Damage assessment of corrosion in prestressed concrete by acoustic emission", Constr. Build. Mater., 40 925-933. http://dx.doi.org/10.1016/j.conbuildmat.2012.11.071 https://doi.org/10.1016/j.conbuildmat.2012.11.071
  4. Elsener, B., Andrade, C., Gulikers, J., Polder, R. and Raupach, M. (2003), "Half-cell potential measurements - Potential mapping on reinforced concrete structures", Mater Struct, 36(261), 461-471. Doi 10.1007/Bf02481526 https://doi.org/10.1007/Bf02481526
  5. Ervin, B.L., Kuchma, D.A., Bernhard, J.T. and Reis, H. (2009), "Monitoring corrosion of rebar embedded in mortar using high-frequency guided ultrasonic waves", J. Eng. Mech.- ASCE, 135(1), 9-19. Doi 10.1061/(Asce)0733-9399(2009)135:1(9) https://doi.org/10.1061/(ASCE)0733-9399(2009)135:1(9)
  6. Farhidzadeh, A. (2014), Application of Pattern Recognition Algorithms and Nondestructive Evaluation Techniques for the Structural Health Monitoring of Civil Structures, PhD dissertation, Department of Civil, Structural, and Environmental Engineering, University at Buffalo, Buffalo, NY, USA.
  7. Farhidzadeh, A. and Salamone, S. (2014), "Reference-free Corrosion Damage Diagnosis in Steel Strands Using Guided Ultrasonic Waves (under review) ", Ultrasonics.
  8. Andrade, C., Alonso, C., Gulikers, J., Polder, R., Cigna, R., Vennesland, O., Salta, M., Raharinaivo, A. and Elsener, B. (2004), "Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method", Mater Struct., 37(273), 623-643. Doi 10.1007/Bf02483292 https://doi.org/10.1007/Bf02483292
  9. Association of American Railroads (1999), Procedure for Acoustic Emission Evaluation of Tank Cars and IM-101 Tanks, (Issue 8. Operation and Maintenance Department), Washington DC.
  10. ASTM (2009), Standard test method for half-cell potentials of uncoated reinforcing steel in concrete, West Conshohocken.
  11. Austin, S.A., Lyons, R. and Ing, M.J. (2004), "Electrochemical behavior of steel-reinforced concrete during accelerated corrosion testing", Corrosion, 60(2), 203-212. https://doi.org/10.5006/1.3287722
  12. Bartoli, I., Phillips, R., di Scalea, F.L., Salamone, S., Coccia, S. and Sikorsky, C.S. (2008), "Load monitoring in multiwire strands by interwire ultrasonic measurements", Proc Spie, 6932. Artn 693209 Doi 10.1117/12.775934 https://doi.org/10.1117/12.775934
  13. Beard, M.D., Lowe, M.J.S. and Cawley, P. (2003), "Ultrasonic guided waves for inspection of grouted tendons and bolts", J. Mater. Civil Eng., 15(3), 212-218. Doi 10.1061/(Asce)0899-1561(2003)15:3(212) https://doi.org/10.1061/(ASCE)0899-1561(2003)15:3(212)
  14. Behnia, A., Chai, H.K. and Shiotani, T. (2014), "Advanced structural health monitoring of concrete structures with the aid of acoustic emission", Constr Build Mater, 65 282-302. http://dx.doi.org/10.1016/j.conbuildmat.2014.04.103 https://doi.org/10.1016/j.conbuildmat.2014.04.103
  15. Choi, O., Park, Y. and H., R. (2008), Corrosion Evaluation of Epoxy-coated Bars by Electrochemical Impedance Spectroscopy, International Concrete Abstracts Portal.
  16. Davies, D.L. and Bouldin, D.W. (1979), "Cluster Separation Measure", IEEE T. Pattern Anal., 1(2), 224-227.
  17. Degala, S., Rizzo, P., Ramanathan, K. and Harries, K.A. (2009), "Acoustic emission monitoring of CFRP reinforced concrete slabs", Constr. Build. Mater., 23(5), 2016-2026. DOI 10.1016/j.conbuildmat.2008.08.026 https://doi.org/10.1016/j.conbuildmat.2008.08.026
  18. Di Benedetti, M., Loreto, G., Matta, F. and Nanni, A. (2013), "Acoustic Emission Monitoring of Reinforced Concrete under Accelerated Corrosion", J. Mater. Civil. Eng., 25(8), 1022-1029. Doi 10.1061/(Asce)Mt.1943-5533.0000647 https://doi.org/10.1061/(ASCE)MT.1943-5533.0000647
  19. Godin, N., Huguet, S. and Gaertner, R. (2005), "Integration of the Kohonen's self-organising map and k-means algorithm for the segmentation of the AE data collected during tensile tests on cross-ply composites", NDT&E Int., 38(4), 299-309. DOI 10.1016/j.ndteint.2004.09.006 https://doi.org/10.1016/j.ndteint.2004.09.006
  20. Godin, N., Huguet, S., Gaertner, R. and Salmon, L. (2004), "Clustering of acoustic emission signals collected during tensile tests on unidirectional glass/polyester composite using supervised and unsupervised classifiers", NDT &E Int., 37(4), 253-264. DOI 10.1016/j.ndteint.2003.09.010 https://doi.org/10.1016/j.ndteint.2003.09.010
  21. Li, Z.J., Li, F.M., Zdunek, A., Landis, E. and Shah, S.P. (1998), "Application of acoustic emission technique to detection of reinforcing steel corrosion in concrete", ACI Mater. J., 95(1), 68-76.
  22. Likas, A., Vlassis, N. and Verbeek, J.J. (2003), "The global k-means clustering algorithm", Pattern Recogn., 36(2), 451-461. http://dx.doi.org/10.1016/S0031-3203(02)00060-2 https://doi.org/10.1016/S0031-3203(02)00060-2
  23. Mangual, J., ElBatanouny, M., Ziehl, P. and Matta, F. (2013), "Corrosion damage quantification of prestressing strands using acoustic emission", J. Mater. Civil Eng., 25(9), 1326-1334. Doi 10.1061/(Asce)Mt.1943-5533.0000669 https://doi.org/10.1061/(ASCE)MT.1943-5533.0000669
  24. Manson, G., Worden, K., Holford, K. and Pullin, R. (2001), "Visualisation and dimension reduction of acoustic emission data for damage detection", J. Intell. Mat. Syst. Str., 12(8), 529-536. Doi 10.1106/Ud4l-Upgc-Wg29-A34l https://doi.org/10.1177/10453890122145375
  25. Farhidzadeh, A., Salamone, S., Luna, B. and Whittaker, A. (2013a), "Acoustic emission monitoring of a reinforced concrete shear wall by b-value-based outlier analysis", Struct. Health Monit., 12(1), 3-13. Doi 10.1177/1475921712461162 https://doi.org/10.1177/1475921712461162
  26. Farhidzadeh, A., Salamone, S. and Singla, P. (2013b), "A probabilistic approach for damage identification and crack mode classification in reinforced concrete structures", J. Intell. Mat. Syst. Str., 24(14), 1722-1735. Doi 10.1177/1045389x13484101 https://doi.org/10.1177/1045389X13484101
  27. Mazille, H., Rothea, R. and Tronel, C. (1995), "An Acoustic-Emission Technique for Monitoring Pitting Corrosion of Austenitic Stainless-Steels", Corros. Sci., 37(9), 1365-1375. Doi 10.1016/0010-938x(95)00036-J https://doi.org/10.1016/0010-938X(95)00036-J
  28. Moustafa, A., Niri, E.D., Farhidzadeh, A. and Salamone, S. (2014), "Corrosion monitoring of post-tensioned concrete structures using fractal analysis of guided ultrasonic waves", Struct. Control. Health., 21(3), 438-448. Doi 10.1002/Stc.1586 https://doi.org/10.1002/stc.1586
  29. Naito, C., Sause, R., Hodgson, I., Pessiki, S. and Macioce, T. (2010), "Forensic examination of a noncomposite adjacent precast prestressed concrete box beam bridge", J. Bridge Eng, 15(4), 408-418. Doi 10.1061/(Asce)Be.1943-5592.0000110 https://doi.org/10.1061/(ASCE)BE.1943-5592.0000110
  30. Niri, E.D., Farhidzadeh, A. and Salamone, S. (2013), "Adaptive multisensor data fusion for acoustic emission source localization in noisy environment", Struct Health Monit, 12(1), 59-77. Doi 10.1177/1475921712462937 https://doi.org/10.1177/1475921712462937
  31. Ohno, K. and Ohtsu, M. (2010), "Crack classification in concrete based on acoustic emission", Constr. Build. Mater., 24(12), 2339-2346. DOI 10.1016/j.conbuildmat.2010.05.004 https://doi.org/10.1016/j.conbuildmat.2010.05.004
  32. Physical Acoustic Corporation (2005), Princeton Junction
  33. Physical Acoustics (2009), Sensor Highway II user's manual, NJ.
  34. Salamone, S., Veletzos, M.J., Lanza di Scalea, F. and Restrepo, J.I. (2012), "Detection of initial yield and onset of failure in bonded posttensioned concrete beams", J. Bridge Eng., 17(6), 966-974. doi:10.1061/(ASCE)BE.1943-5592.0000311 https://doi.org/10.1061/(ASCE)BE.1943-5592.0000311

피인용 문헌

  1. Application of acoustic emission monitoring for assessment of bond performance of corroded reinforced concrete beams vol.16, pp.6, 2017, https://doi.org/10.1177/1475921716681460