DOI QR코드

DOI QR Code

The Relation between Injection Molding Conditions and Gloss of ABS Molding

사출성형 조건과 ABS 성형품 광택의 관계

  • Received : 2013.08.30
  • Accepted : 2013.11.07
  • Published : 2013.11.30

Abstract

Plastic product manufacturing industry has usually focused on a mechanical and physical characteristics of molding. Recently, not only these characteristics but also the aesthetic value is significantly considering. Especially, the molding's gloss, which we can easily distinguish, is an important aesthetic point. In this study, it were investigated that the gloss variation of ABS moldings by changing injection conditions such as injection pressures, injection speed, holding pressures melt and mold temperatures by injection molding experiment. The experimental results revealed that the holding pressure was the most active condition on gloss of ABS molding.

Keywords

ABS;Gloss;Injection Molding Condition;Injection Pressure;Injection Speed

References

  1. T. A. Osswald, "Polymer Processing Fundamentals", Hanser, pp. 117, 1998.
  2. G. Potsch, W. Michaeli, "Injection Molding an Introduction", Hanser, pp. 1-2, 1995.
  3. S. D. Ye, B. H. Min, "Injection Molding Analysis of the Tub-drum for Drum Type Wahser Using CAE", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 2, pp. 60-65, 2010.
  4. H. S. Lee, H. S. Byun, "Study on the Design Optimization to Improve Injection Molding Performance of Plastic Regulator Rail", Journal of the Korea Academia-Industrial cooperation Society, Vol. 12, no. 12, pp. 5398-5404, 2011. DOI: http://dx.doi.org/10.5762/KAIS.2012.13.12.5709 https://doi.org/10.5762/KAIS.2012.13.12.5709
  5. K. Y. Park, H. S. Kim, J. H. Kang, J. C. Park, "CAE Analysis and Optimization of Injection Molding for a Mobile Phone Cover", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 2, pp. 60-65, 2012.
  6. Edited R. M. Harris, "Coloring Technology for Plastics", Society of Plastics Engineers, pp. 149-155, 1999.
  7. E. Dawkins, K. Horton, P. Engelmann, M. Monfore, "Color and Gloss-The Connection to Process Condition", The Journal of Injection Molding Technology, Vol. 2, pp. 1-7, 1998.
  8. D. M. Lee, B. K. Han, O. S. Lee, S. H. Lee, "Design and Manufacturing of Injection Mold with Pressure and Temperature Sensors for Tensile Test Specimen", Proc. of 2005 KSME Spring Conference, pp. 1750-1754, 2005.
  9. M. Y. Lyu, J. G. Choi, Y. Pae "Investigation of the Jetting Phenomena in Injection Molding for Various Injection Speeds, Resins and Mold Shapes", Transactions of Materials Processing, Vol. 12, No. 1, pp. 3-10, 2003. DOI: http://dx.doi.org/10.5228/KSPP.2003.12.1.003 https://doi.org/10.5228/KSPP.2003.12.1.003
  10. S. H. Lee, D. M. Lee, B. K. Han, "The Effects of Injection Speed and Melt Temperature on Mechanical Properties for Polycabonate Tensile Test Specimen", Proc. of 2005 KSME Spring Conference, pp. 1594-1598, 2005.
  11. G. Menges, W. Michaeli, P. Mohren, "How to Make Injection Molds", Hanser, pp. 205-207, 2001. DOI: http://dx.doi.org/10.3139/9783446401808 https://doi.org/10.3139/9783446401808