DOI QR코드

DOI QR Code

A Study on Classification of the Panelizing for Architectural Freeform Surfaces and the Optimization of Panelizing

비정형 건축곡면 패널분할과 최적화 유형 분류에 관한 연구

  • Ryu, Jeong-Won (Division of Architecture, Sun Moon University) ;
  • Moon, JunSik (Department of Architecture& Architectural Engineering, Seoul National University)
  • Received : 2012.08.01
  • Accepted : 2013.09.06
  • Published : 2013.09.30

Abstract

Freeform buildings have become the main trend that reflects complex and diverse nature of the society with the progress on the digital technology. Therefore, the demands of the researches about architectural freeform surfaces have increased rapidly over the past few years. As the fundamental research for the successful construction of the freeform buildings, this study focuses on the definition of terms, and the classification of curved-form, the methods of panelizing, and the optimization of panelizing through an integrated perspective.

Keywords

Architectural Freeform Surfaces;Panelizing;Optimization

Acknowledgement

Supported by : 한국연구재단

References

  1. Park Jung-dae, Digital Technology and Architectural Dessign Process on the Construction of Curved Forms, Ph.D. Thesis in Architecture Department, Seoul National University, 2005
  2. Shelden, Dennis R. Digital Surface Reprsesentation and the Constructibility of Gehry's Architecture, Ph.D. Thesis in Architecture Department, MIT, 2002
  3. Park Heung Sik, A Study on a Surface Generation Method of Free-From Architecture using a Planar Quadrilateral Mesh Technique, Master, Thesis in Architecture Department, Hanyang University, 2009
  4. Bae Kyung-Jin, Lee Sang-Heon, Jun Han-Jong, "A Study on Digital design process of the materialization of Free form Design architecture", Proc. of Spring Annual Conference of the Architectural Institute of Korea (Planning & Design), v.29 n.1, 2009
  5. Ryu Jeong-Won, "Digital Technologies for Freeform Building in Korea", Journal of the Korea Academia- Industrial cooperation Society, Vol.13, No.9, 2012 DOI: http://dx.doi.org/10.5762/KAIS.2012.13.9.4259 https://doi.org/10.5762/KAIS.2012.13.9.4259
  6. Junglim Architecture(NUDL), Design Document Series_37, pp. 126-137, Damdi, 2011
  7. No Hwi, "3 matrixes for 3 projects", 6th buildingSMART Korea Workshop, 2009
  8. Eigensatz, M., Deuss, M., Schiftner, A., Kilian, M., Mitra, N., Pottmann, H., & Pauly, M. "Case Studies in Cost-Optimized Paneling of Architectural Freeform Surfaces". Advances in Architectural Geometry. 2010. p.8 DOI: http://dx.doi.org/10.1007/978-3-7091-0309-8_4
  9. Kolarevic B. Architecture in the digital age design and manufacturing. Taylor & Francis, p.84, 2003
  10. Weisstein, Eric W. "Algebraic Surface." From MathWorld--A Wolfram Web Resource. http://mathworld.wolfram.com/AlgebraicSurface.html
  11. Weisstein, Eric W. "Quadratic Surface." From MathWorld--A Wolfram Web Resource. http://mathworld.wolfram.com/QuadraticSurface.html
  12. Weisstein, Eric W. "Gaussian Curvature." From MathWorld--A Wolfram Web Resource. http://mathworld.wolfram.com/GaussianCurvature.html
  13. Weisstein, Eric W. "Generalized Cylinder." From MathWorld--A Wolfram Web Resource. http://mathworld.wolfram.com/GeneralizedCylinder.html
  14. Weisstein, Eric W. "Tangent Developable." From MathWorld--A Wolfram Web Resource. http://mathworld.wolfram.com/TangentDevelopable.html
  15. http://www.grad.hr/itproject_math/Links/sonja/ gausseng/ehpp/ehpp.html