Development of water cropping machine for slab pattern processing

석판재용 물다듬 패턴무늬 가공 전용기 개발

  • Kim, Kyoung-Chul (Graduate school, Chonbuk National University) ;
  • Ko, Min-Hyuc (Graduate school, Chonbuk National University) ;
  • Kim, Jong-Tae (Graduate school, Chonbuk National University) ;
  • Lee, Ji-Su (Graduate school, Chonbuk National University & Bissal Company) ;
  • Ryuh, Beom-Sahng (Division of mechanical System Engineering & Intelligence Robot Center, Chonbuk National University)
  • 김경철 (전북대학교 대학원 기계시스템공학과) ;
  • 고민혁 (전북대학교 대학원 기계시스템공학과) ;
  • 김종태 (전북대학교 대학원 기계시스템공학과) ;
  • 이지수 (전북대학교 대학원 건축도시공학과 & (주)빛살) ;
  • 유범상 (전북대학교 기계시스템공학부 & 지능형로봇연구소)
  • Received : 2013.06.04
  • Accepted : 2013.09.06
  • Published : 2013.09.30


This paper is a special-purpose machine studies for processing various patterns on the surface of the stone. We have developed a special-purpose machine that can be applied in various patterns upon the surface treatment of the stone with the water jet. The special-purpose machine is Configured of Transfer mechanism, motion controller, multi-nozzle mechanism, ultra high pressure water control system and S/W. We conducted a performance evaluation experiments of the pattern. We have developed a special-purpose machine with a precision of machining error ${\pm}0.5mm$ and pattern processing of various types.


NC control;Processing pattern;Surface treatment of stone;Water jet


  1. J. H. Kang, M. H. Chang, "Development of the stone surface process equipment by Water Jet System" J. of KSIE, Vol. 26, No. 3, pp. 31-38, September, 2003.
  2. J. H. Kang, D. P. Hong, "Development of the multi axis whetstone system in the stone polishing process for the work environment improvement" Journal of the korea safety management & Science, Vol.6, No.4 pp. 171-181, 2004.
  3. J. H. Kang, Y.W. Cho, M. K. Park, "The Optimal Parameter design of the Stone Surface Process Using the Taguchi Method", Journal of the korea safety management & Science, Vol.5, No.1, pp. 103-113, 2003.
  4. B. M. Choi, S. K. Hong, B. S. Ryuh, S. M. Park "Development of PC-NC Water Jet Cutting System and Cutting of Tianium" KSPE, Vol.18, No.3, pp. 55-60, 2001
  5. S. J. each, J. L. Jartman, "Hypothesis for the Mechanism of Rock Failure under Impact" 4th Symposium on Rock Mechanics Pennsylvania, pp. 221-228. 1961.
  6. Phadke Madhav S., "Quality Engineering Using Robust Design", Prentice Hall PTR, 1989
  7. Fowlkes, W. Y. and Creveling, C. M., "Engineering Methods for Robust Product Design", pp. 33-88, Addison-Wesley Publishing Company, 1995.