DOI QR코드

DOI QR Code

Case Study of Flexural Strength Evaluation of Epoxy Injected Concrete Using Low Pressure Mixed with Mechanical High Pressure

기계식 고압과 저압을 혼용한 에폭시 주입 콘크리트의 휨강도 검토 사례 연구

  • Received : 2011.07.19
  • Accepted : 2012.02.14
  • Published : 2012.02.29

Abstract

The objective of this study is to investigate the capacity of epoxy injection method using low pressure mixed with high pressure. Injection depth test and flexural strength test were respectively performed on $40{\times}45{\times}35$ cm and $100{\times}10{\times}40$ cm specimens. Considered as the test variables were injection type(low pressure, low and high pressure), crack width(0.25 mm, 0.50 mm), injection direction(upper, lower, side), and epoxy viscosity(low, medium, high). Test results showed that low viscosity epoxy injection depth of injector using low pressure mixed with high pressure for upper direction were 23 cm and tension strength of crack face repaired by injector using low pressure mixed with high pressure was larger than that of concrete.

Keywords

concrete crack;injector;epoxy viscosity;injection depth

References

  1. 강석표, 홍순조, "균열주입재로 보수된 콘크리트의 휨강도 및 파괴에너지", 대한건축학회논문집 구조계, Vol. 25, No. 4, pp. 161-168, 2009.
  2. 류금성 외 4인 "에폭시수지계 주입재의 물성 및 강도특성에 관한 실험적 연구", 대한토목학회 학술발표회논문집, pp. 805-808, 2000.
  3. 백종명, 장석재, "콘크리트 구조물 균열에 에폭시 주입의 표준화를 위한 기초적 연구", 한국구조물진단학회, Vol. 10, No. 1, pp. 115-122, 2006.
  4. 서치호, 이성복, 고진수, "직각천공방식으로 패커를 설치한 콘크리트 균열보수공법의 보수재 주입 특성에 관한 연구", 한국건축시공학회 논문집, Vol. 6, No. 2, pp. 91-98, 2006.
  5. 이찬영, 심재원, "신․구 콘크리트접착제의 시공 조건에 따른 성능", 한국콘크리트학회 가을학술발표회 논문집, pp. 513-518, 2002.
  6. Song X. F., Wei J. F., and He T. S. H., "A Method to Repair Concrete Leakage Through Cracks by Synthesizing Super-absorbent Resin in situ", Construction and Building Materials, Vol. 23, pp. 386-391, 2007.