DOI QR코드

DOI QR Code

A Study on the Determination of Slip-up Time for Slip-Form System using Surface Wave Velocity

표면파 속도를 이용한 슬립폼 시스템 상승 시기 결정에 관한 연구

  • Received : 2012.05.11
  • Accepted : 2012.06.20
  • Published : 2012.09.15

Abstract

The early setting time of concrete is an important factor determining the slip up velocity of the slip-form system. Accordingly, need is for a technique evaluating the early setting time in order to secure the safety of the slip-form system and the construction quality of concrete. This paper intends to estimate the early setting time by evaluating the setting degree of concrete using surface wave velocity so as to determine the slip up time of the slip-form system. Penetration resistance test and compressive strength test are performed first to clarify the relationship between the early setting time of concrete and the compressive strength. Then, compressive strength test and ultrasonic wave test are conducted to examine the relation between the compressive strength and the surface wave velocity. Continuous wavelet transform is adopted to measure the surface wave velocity. Numerical analysis is carried out to demonstrate the appropriateness of the application of continuous wavelet transform. Based on these results, the propagation velocity of the surface wave required for the slip up of slip-form system is suggested. Finally, a reduced model test of the slip-form system is conducted to verify the feasibility of the proposed surface wave velocity for the determination of th slip up velocity.

Acknowledgement

Grant : 콘크리트 고주탑 가설장비 및 공법개발

Supported by : 초장대교량사업단

References

  1. 건설교통부(2006) 가설공사표준시방서, 건설교통부.
  2. 국토해양부(2009) 콘크리트표준시방서, 국토해양부.
  3. 국토해양부(2009) 터널표준시방서, 국토해양부.
  4. 김희석, 이종세(2007) 파진행 문제를 위한 Paraxial 경계조건의 유한요소해석, 한국전산구조공학회 논문집, 한국전산구조공학 회, 제20권 제3호, pp. 303-309.
  5. 이회근, 이광명(2002) 초음파 속도 모니터링에 의한 고강도 콘크 리트의 응결 평가, Journal of the Korea Concrete Institute, Vol. 14 No. 6, pp. 973-981. https://doi.org/10.4334/JKCI.2002.14.6.973
  6. 천재원, 이영철(1997) 서해대교현장 슬립폼공법 시험시공(Mockup Test), 대림기술정보 '97 여름, pp. 99-107.
  7. 최병선(2005) Wavelet 해석, 세경사.
  8. 한국도로공사(2009) 고속도로공사 전문시방서, 한국도로공사.
  9. 한국콘크리트학회(2002) 콘크리트 건설 제요령, 한국콘크리트학회.
  10. ACI 318-05 (2004) Building Code Requirements for Structural Concrete and Commentary, ACI 318.
  11. ACI 347-04 (2005) Guide to formwork for concrete, ACI 347.
  12. Bedford, A. and Drumheller, D. S. (1996) Elastic wave propagation, John Wiley & Sons Ltd. New York.
  13. EM 1110-1-2009 (1997) Engineering and design architectural concrete, EM.
  14. Graff, K. F. (1975) Wave motion in elastic solids, Ohio State University Press.
  15. Hurd, M. K. (2005) Formwork for Concrete, ACI 347.
  16. Pauw, A. (1960) Static modulus of elasticity of concrete as affected by density, Proceedings, ACI Journal, Vol. 57, No. 6, pp. 679-687.
  17. Reddy, J. N. (2006) An introduction to the finite element method, McGraw-Hill, New York.
  18. Reichverger, Z. and Jaegermann, C. (1980) Optimal regime in slip form concreting, Mate'riaux et Constructions, Vol. 18, No. 74, pp. 109-113.
  19. Shin, S. W., Yun, C. B., Opovics, J. S., and Kim, J. H. (2007) Improved Rayleigh wave velocity measurement for nondestructive early-age concrete monitoring, Research in Nondestructive Evaluation, American Society for Nondestructive Testing, Vol. 18, pp. 45-68. https://doi.org/10.1080/09349840601128762
  20. Viktorov, I. A. (1967) Rayleigh and Lamb waves, Physical theory and applications, Plenum Press, New York.
  21. Woods, R. D. (1968) Screening of surface waves in soils, J. Soil Mech. Founds Div., ASCE, pp. 951-79.

Cited by

  1. An Experimental Study on the Configuration Management for the Construction of Tapered Concrete Pylon of Super Long Span Bridge Using K-Slip Form System vol.7, pp.4, 2015, https://doi.org/10.7763/IJET.2015.V7.808
  2. A Study on the Quality Control of Concrete during the Slip Form Erection of Pylon vol.05, pp.08, 2013, https://doi.org/10.4236/eng.2013.58078
  3. A Study on the Design of the Slip-Form System for the Construction of Tapered Concrete Pylons vol.15, pp.3, 2014, https://doi.org/10.6106/KJCEM.2014.15.3.128