- Volume 26 Issue 1
DOI QR Code
A Study on the Effect of the Shot Peening in SCM420H Planetary Gear
SCM420H 유성기어의 쇼트피닝 효과에 관한 연구
- Ahn, In-Hyo (Korea Aviation Polytechnic) ;
- Ahn, Min-Ju (Korea Polytechnic VII) ;
- Lyu, Sung-Ki (School of Mechanical & Aerospace Engineering, Gyeongsang National University)
- Received : 2010.10.04
- Accepted : 2011.01.28
- Published : 2011.02.28
This study deals with the effect of the shot peening in SCM420H planetary gears. The hardness and roughness of the gear surface can be improved by shot blast and shot peening. there in, the shot peening techniques are welcomed especially as one of the physical surface improvement methods. The two treatments are used widely, because of the qualitative analysis of shot blast and shot peening has become possible and the surface treatment can be done with little costs compared with other surface improvement methods. Therefore, this study investigates the effects of shot blast and shot peening in surface shape. The fatigue strength test at a constant stress amplitude is performed by using an electrohydraulic serve-controlled pulsating tester. And fatigue test also explained characteristics of shot blast and shot peening of planetary gears.
planetary gears;shot blast;shot peening;S-N curves
- 정성균, 이승호, 쇼트피닝 가공 개론, 세화출판사, pp. 13-29, 78, 2001.
- 이승호, 김희송, 정성균, 문혁, "고강도화를 위한 쇼트피닝이 피로강도에 미치는 영향", 대한기계학회 추계학술대회 논문집 A, pp. 322-327, 1997.
- AGMA Standard, "Practice for carburized Aerospace Gearing", 246. 0A, pp. 11-14, 1979.
- 염영하, "최신 재료 시험법", pp. 200-201, 1996.
- ISO/DP 6335/111, Calculation of load capacity of spur and helical gears, part 3, pp. 78-105, 1980.
- Xenophon, J. K., "Shot Peening Viable Method to Extending Component Lift", SAE. 891932, 1989.
- Sung-ki Lyu, etc, "Effects of Surface Treatment on the Bending Fatigue Strength of Carburized Spur Gears", JSME International Journal Series C, Vol. 39, No. 1, pp. 108-114, 1996.
- Proc, "First International Conference on Shot Peening", Paris. Pergamon Press. 1981.
- 신용승, 정성교, 서유원, "쇼트피닝한 SCM22강의 피로특성평가", 한국공작기계학회 논문집, pp. 126-131, 1998.
- 이종규, 김정규, "피로강도 및 수명에 미치는 Shot Peening에 의한 잔류응력의 영향", 대한기계학회 논문집 A권, 제21권, 제9호, pp. 1498-1506, 1997.
- 김광태, 정재수, "기어 기초 활용 기술", 예문사, pp. 3-7, 2001.
- Wohlfahrt, H., "The Influence of Peening Condition on the Resulting Distribution of Residual Stress", Proc. of the 2nd International Conference on Shot Peening, Vol. 1, Chicago, pp. 316-331, 1984.