- Volume 6 Issue 3
DOI QR Code
Magnetic Interference on the Infrastructure for a Super-speed Tube Train
- Lee, Hyung-Woo (Dept. of Vehicle Dynamics & Propulsion System Research, Korea Railroad Research Institute) ;
- Jang, Seung-Yup (Dept. of Vehicle Dynamics & Propulsion System Research, Korea Railroad Research Institute) ;
- Kang, Bu-Byoung (Dept. of Vehicle Dynamics & Propulsion System Research, Korea Railroad Research Institute) ;
- Cho, Su-Yeon (Dept. of Electrical Engineering, Hanyang University) ;
- Lee, Ju (Dept. of Electrical Engineering, Hanyang University)
- Received : 2010.06.23
- Accepted : 2011.01.18
- Published : 2011.05.02
The super-speed tube train was introduced to increase the speed of ground transportation. It levitates magnetically and runs in a partial vacuum tube, which significantly reduces air resistance. However, strong magnetic force sufficient to propel the massive train can affect the infrastructure. The induced eddy current produces joule heat, and raises the inside temperature of the girder, which might lead to electrochemical corrosion on the girder, thereby weakening its durability. In this paper, the authors analyzed the magnetic flux and induced eddy current in the reinforced concrete girder by using three-dimensional FEM, particularly by varying the number of reinforcing steels of the upper flange of the girder to the condition of almost the same flexural strength and reinforcing steel amount.
- H.-W. Lee, K.-C. Kim, and J. Lee, “Review of Maglev train technologies,” IEEE Trans. Magnetics, vol. 42, pp. 1917-1925, Jul. 2006. https://doi.org/10.1109/TMAG.2006.875842
- Yamamura S., “Magnetic levitation technology of tracked vehicles present status and prospects,” IEEE Trans. Magnetics, vol. 12, pp. 874-878, Nov. 1976. https://doi.org/10.1109/TMAG.1976.1059125
- Sinha P., “Design of a magnetically levitated vehicle,” IEEE Trans. Magnetics, vol. 20, pp. 1672-1674, Sep. 1984. https://doi.org/10.1109/TMAG.1984.1063552
- Rogg D., “General survey of the possible applications and development tendencies of magnetic levitation technology,” IEEE Trans. Magnetics, vol. 20, pp. 1696-1701, Sep. 1984. https://doi.org/10.1109/TMAG.1984.1063347
- Eastham A.R., Hayes W.F., “Maglev systems development status,” IEEE Aerospace and Electronic Systems Magazine, vol. 3, pp. 21-30, Jan. 1988.
- R. Kemp and R Smith, “Technical issues raised by the proposal to introduce a 500 km/h magnetically levitated transport system in the UK,” Report on Imperial College London and Lancaster University, pp. 12, 2007.
- M. Mossi and P. Rossel, “Swissmetro : a revolution in the high-speed passenger transport systems,” in 2001 Swiss Transport Research Conference, pp. 1-16.
- B. Kang, et al., “Development of the core technologies for the ultra high-speed tube train,” Korea Rail road Research Institute report, Dec. 2009.
- H.-W. Lee, S.-Y. Cho, W. Cho, J. Lee and H.-B. Kwon, “Analysis of the magnetic effect on the tube infrastructure for a super-speed tube train,” International Journal of Railway, vol. 2, pp. 170-174, Dec. 2009.
- The evaporation characteristics of liquid nitrogen coolant of HTS maglev in a low-pressure environment vol.129, 2016, https://doi.org/10.1016/j.vacuum.2016.04.012