A Study on Numerical Calculations of Hybrid Air Pollution Control System Coupled with SDR and Bag Filter(II) -Structural Improvement

반건식 반응기와 백필터를 결합한 하이브리드 대기오염제어 시스템의 수치해석적 연구(II) -구조개선을 중심으로

  • 김진욱 (한서대학교 환경공학과) ;
  • 정유진 (씨이테크 연구개발센터 컨설팅팀) ;
  • 유정근 (한서대학교 화학공학과) ;
  • 손병현 (한서대학교 환경공학과)
  • Received : 2010.12.21
  • Accepted : 2011.02.10
  • Published : 2011.02.28


The 3D computational fluid dynamics (CFD) was performed in relation to the internal fluid characteristics and flow distribution for the development of the most optimal model in the complex post-disposal device. As it is expected that a channeling (drift) would be made by the semi-dry reactor due to the large difference in the flow distribution by the compartment in the bag filter, a structural improvement should be urgently made for more uniformed flow distribution in the bag filter. Three types of modifications such as i) changing the plenum shape, ii) orifice install in the exit part of cleaned gas, iii) increasing the plenum number were established. From the results of computational fluid dynamics, it was revealed that the changing of plenum shape and orifice install in the exit part of cleaned gas was more reasonable than the increasing the plenum number because of the difficulties of retrofit. The complex post-disposal device, modified and supplemented with this analysis, integrated the semi-dry reactor and the bag filter in a single body, so it follows that the improvement can make the device compact, save the installation area, save the operation fee, and management more convenient.


CFD;SDR;Bag filter;Velocity field


  1. 장정국, 이제근, 이기호, 전해수, "도시폐기물 소각공정에서 다이옥신류 저감방안에 관한 연구", 한국폐기물학회지, 11(4), pp. 630-644, 1994.
  2. 박영옥, 손재익, "폐기물 소각 배가스 제어기술(II)", 한국폐기물학회지, 11(3), pp. 475-487, 1994.
  3. 채재우, 박영수, 김지완, 탁선재, 곽용환, "선회식 공간분할 연소시스템에 관한 연구", 한국폐기물자원순환학회(구 한국폐기물학회) 춘계학술연구회발표논문집, pp. 109-112, 2003.
  4. 권영현, 김진욱, 정유진, 김민철, 이재정, 이강우, 손병현, "번건식 반응기와 백필터를 결합한 하이브리드 대기오염제어시스템의 수치해석적 연구(I)", 한국산학 기술학회논문지, 11(11), pp. 4656-4663, 2010.
  5. 정유진, "자연환기 벤틸레이터 최적화 설계에 관한 기초 연구", 창원대학교 공학석사학위논문, 2001.
  6. B. E. Launder and D. B. Spalding, "The numerical computation of turbulent flows", Computer Methods in Applied Mechanics and Engineering, 3(2), pp. 269-289, 1974.
  7. 정유진, 하현철, 김태형, 유근종, "열원이 존재하는 작업장내 기류 및 온도장 예측", 한국산업위생학회지, 11(1), pp.190-205, 2001.