Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Design and Application of a Ground Risk Voltage Measurement System

대지 위험전압 측정기의 설계 및 적용

  • Jang, Un-Yong (Division of Electrical and Electronics Engineering, Korea Maritime University) ;
  • Cha, Hyeon-Kyu (Division of Electrical and Electronics Engineering, Korea Maritime University) ;
  • Cha, Sang-Wook (Division of Electrical and Electronics Engineering, Korea Maritime University) ;
  • Park, Dae-Won (Division of Electrical and Electronics Engineering, Korea Maritime University) ;
  • Kil, Gyung-Suk (Division of Electrical and Electronics Engineering, Korea Maritime University)
  • 장운용 (한국해양대학교 전기전자공학부) ;
  • 차현규 (한국해양대학교 전기전자공학부) ;
  • 차상욱 (한국해양대학교 전기전자공학부) ;
  • 박대원 (한국해양대학교 전기전자공학부) ;
  • 길경석 (한국해양대학교 전기전자공학부)
  • Received : 2010.12.20
  • Accepted : 2011.01.18
  • Published : 2011.03.01

Abstract

This paper dealt with the design, fabrication and application of a risk voltage measurement system (RVMS) which analyzes the step and touch voltages in electrical grounding systems. The RVMS supply 300 V and 1.4 A in ranges from 40 Hz to 1 kHz as the test power source. A DAQ module having resolution of 400 kS/s and 16 bit is equipped with 7 inputs for measuring voltage and current. Also, a noise elimination algorithm of digital filter was applied to reduce the measurement error caused by external noises as a commercial frequency current. The performance of the RVMS was evaluated by measurement of the step and touch voltage according to the IEEE standard 80 and 81 in a grounding system with a 10 m counterpoise. The result showed that the RVMS analyzes the risk voltage with the error below 5%.

Keywords

File

Download PDF

Acknowledgement

Supported by : 한국연구재단

References

  1. A. Geri, IEEE Trans. on Power Delivery, 14, 1008 (1999). https://doi.org/10.1109/61.772347
  2. Ronald P. O Riley, DELMAR, 40 (2002).
  3. A. P. Sakis Meliopoulos, Power System Grounding and Transients: An Introduction, (Marcel Dekker, Inc., 1988), 119.
  4. Mohamed Nayel, Jie Zhao, Jinliang He, Zongyuan Cai, Qi Wang, CEEM/Dalian, 56 (2006).
  5. Ralph Morrison, Warren H. Lewis, GROUNDING AND SHIELDING IN FACILITIES, (John Wiley & Sons, 1990) p. 44.
  6. Tony Mitton, Robin Watson, CDEGS User Meeting, 1 (2005).
  7. IEEE Std 81-1983, 3.
  8. IEEE Std 80-2000,16.
  9. IEEE Std 81.2-1991.
  10. G. S. Kil, D. W. Park, U. Y. Jang, J. S. Han, and H. J. Kil, J. KIEEME 23, 793 (2010).