DOI QR코드

DOI QR Code

Objective Hand of High-performance Silk Fabrics

기능성 가공된 견직물의 태

  • Received : 2010.01.18
  • Accepted : 2010.05.24
  • Published : 2010.05.31

Abstract

Most silk fabrics are produced only after the degumming process to make the best use of the properties and have restricted silk processing that do not hinder their performance. However, considering the highly increased preference for natural fibers and the shortage of raw silk, high-quality upgraded silk product functions are required by the development of a processing technology and a good design. This study analyzes the changes with the samples by the functional finish such as softening finishing, wash and wear, tannin weighting by measuring the objective hand of scoured silk and three finished ones using KES-FB. As a result, the change of objective hand of finished silk fabrics that improves functionality was analyzed and compared. The increase of KOSHI after the finish became stiffer show that the silk fabric samples are appropriate for summertime clothes with the retention of a certain clothing climate for the body. The stiffness of finished fabrics for the normal had a closer relationship with the density of fabrics than the type of finishing. The samples (after the softening finishes) maintain better elasticity according to the properties of the softener and the finishing agent. Although the specimens of this study were thin fabrics, their elasticity against compression increased after the softening finishes and became softer than degummed silk. The surface properties of georgette were changed by all types of finishing.

Keywords

Silk fabrics;Functional finish;KES-FB

References

  1. 고은숙, 이혜선. (2003). 감즙염색이 태에 미치는 영향. 한국의류학회지, 27(8), 883-891.
  2. 김순심, 양진숙, 최종명. (2000). 마와 인조섬유 교직물의 물성 및 태평가. 한국의류학회지, 24(6), 828-837.
  3. 김춘정, 나영주. (1999). 견직물의 태와 감성차원의 이미지 스케일에 관한 연구. 한국의류학회지, 23(6), 898-908.
  4. 김춘정, 나영주. (2000). 견직물의 물리적 자극에 따른 태와 역학적 특성. 한국의류학회지, 24(3), 429-439.
  5. 권헌선, 권오경, 성수광. (1998). 시판 한복지의 태에 관한 연구 (II). 한국섬유공학회지, 35(7), 447-455.
  6. 남성우, 정인모. (1994). 탄닌에 의한 견섬유의 증량. 성대논문집, 45(2). 245-252.
  7. 박연희, 배현숙. (2005). 텐셀 혼방직물의 키토산 가공처리를 통한 감성기능소재의 개발 (제1보). 한국의류학회지, 29(7), 987-996.
  8. 배순이, 박병기. (2003). 실리콘 수지에 의한 견직물의 발수가공. 전북대학교 부설공학연구원, 34, 71-80.
  9. 서문호. (1994). 직물구조가 신합섬직물의 역학적 특성에 미치는 영향 (I). 한국섬유공학회지, 31(12), 1038-1050.
  10. 설정화, 최석철. (1995). 견의 탄닌처리에 관한 연구 (III). 한국염색가공학지, 7(3), 60-67.
  11. 설정화, 최석철. (1999). 견의 탄닌처리에 관한 연구 (IV). 한국염색가공학지, 11(4), 16-23.
  12. 성수광, 권오경, 이정숙. (1988). 부인용 한복지의 굽힘특성에 관한 연구. 대한가정학회지, 26(1), 11-19.
  13. 성수광, 권오경, 황지영. (1988a). 부인용 한복지의 전단특성에 관한 연구. 대한가정학회지, 26(2), 29-38.
  14. 성수광, 권오경, 황지영. (l990b). 부인용 한복지의 표면특성에 관한 연구. 여성문제연구, 18(0), 169-179.
  15. 이은주, 조길수. (2000). 블라우스용 직물의 소리와 태. 한국의류학회지, 24(4), 605-615.
  16. 이정순. (2002). 의마가공용 폴리우레탄 수지를 이용한 견직물의 가공. 한국의류학회지, 27(12), 1368-1373.
  17. 이혜선. (1991). 감즙처리포의 물성에 관한 연구. 제주대학교 학회지, 33, 175-182.
  18. Frydrych, I., & Matusiak, M. (2005). Effect of woven fabrics on fabric hand of cotton and CO/PES fabrics. The Journal of the Textile Institute, 96(4), 239-286.
  19. Kawahara, Y., Hananouchi, T., & Kimura, T. S. (2003). Tensile properties of silk fibers treated with dimetylsulfoxide. Textile Research Journal, 73(4), 289-291. https://doi.org/10.1177/004051750307300402
  20. Matsudaira, M., & Kawabata, S. (1992). Changes in the mechanical properties and fabric handle of polyester-fibre fabrics through the finishing stages. The Journal of the Textile Institute, 83(1), 144-155. https://doi.org/10.1080/00405009208631184
  21. Niwa, M. (1983). Relationship between clothing materials and clothing performance. Journal of Home Economics of Japan, 34, 462-473.
  22. Tsukada, M. (1988). Structural characteristics of hydroxyethyl methacrylate/methacrylamide grafted silk fibers. Journal of Applied Polymer Science, 35, 2133-2140. https://doi.org/10.1002/app.1988.070350813
  23. Tsukada, M., & Shiozaki., H. (1989). Chemical and property modification of silk with dibasic acid anhydrides. Journal of Applied Polymer Science, 37, 2673-2644.
  24. Yang, Y., & Li, S. (1993). Silk fabric non-formaldehyde creaseresistant finishing using citric acid. The Journal of the Textile Institute, 84(4), 638-644. https://doi.org/10.1080/00405009308658995
  25. Yutaka, M., Fujimoto, M., & Fukuhara, M. (2003). Innovation in polyester fibers: From silk-like to new polyester. Textile Research Journal, 73(7), 2120-2129.
  26. Cheng, H., & Yejuan, J. (2002). Wash and wear finishing of silk fabrics with a water-soluble polyurethane. Textile Research Journal, 72(11), 1009-2002. https://doi.org/10.1177/004051750207201113
  27. Matsudaira, M., & Matsui, M. (1992). Features of mechanical properties and fabric handle of silk weaves. The Journal of the Textile Institute, 83(1), 133-143. https://doi.org/10.1080/00405009208631183
  28. 김인영. (1994). 탄닌증량효과에 따른 견섬유의 염색성과 물성. 한국염색가공학회지, 6(4), 62-71.
  29. 권오경, 성수광. (1991). 한복지의 착용성능에 관한 연구-구김회복율 및 드레이프성을 중심으로-. 한국섬유공학회지, 28(4), 33-41.
  30. 이수철. (1993). 견섬유 증량가공방법 및 실용화 방안에 관한 연구. 디자인학연구, 6(1), 73-86.
  31. 장병호, 신광호, 이병학. (1993). Epoxy 및 Silxone Emulsion 처리가 견직물의 방추성에 미치는 영향. 한국염색가공학회지. 5(1), 10-18.
  32. 정상준. (2000). Malic acid를 이용한 견직물의 Wash and Wear 가공. 서울대학교 대학원 석사학위 논문.
  33. Ramadan, A. M., Mosleh, S., & Gawish, S. M. (2004). Weighting and improvement of silk properties. Journal of Applied Polymer Science, 93, 1743-1747. https://doi.org/10.1002/app.20611

Cited by

  1. Physical Properties and Objective Hand Values of Recycled Polyester Knit Fabrics vol.49, pp.2, 2012, https://doi.org/10.12772/TSE.2012.49.2.098

Acknowledgement

Supported by : 서울대학교 생활과학연구소