Characteristics of Specimens Made from Primary Clay and Red Hwangto with MSWI Fly Ash by Sintering Process

Sintering process에 의한 MSWI fly ash를 혼합한 일차점토(一次粘土)와 적황토(赤黃土) 공시체(公試體)의 특성(特性)

  • Received : 2008.09.29
  • Accepted : 2010.02.18
  • Published : 2010.04.30


This research investigates the feasibility of ceramic specimens made from Primary clay and Red Hwangto with MSWI fly ash. Specimens preduced by mix-design maximum 20 wt% MSWI fly ash were analysed by SEM, UTM, ICP, etc. As a result of measurement,$P_{10}$ specimen was improved on bending strength and $R_5$ specimen was improved on compressive and bending strength. Also amount of extracted heavy metal was suitable for regulatory limits. This indicates that MSWI fly ash is indeed suitable for the partial replacement of ceramic materials in bricks.


Supported by : 호원대학교


  1. 박성부, 2003: 최신 폐기물 처리공학, 성안당.
  2. 전국생활폐기물소각시설운영협의회, 2008: 2007년도생활 폐기물 자원회수시설운영현황, 환경부.
  3. 박상민, 2007: 도시폐기물 소각비산재의 재활용 및 세척수 유해성분 제거특성에 관한 연구, 전북대학교 대학원, 박사학위 논문.
  4. A. Polettini, R. Pomi, L. Trinci, A. Muntoni, and S. Lo Mastro, 2004: Engineering and environmental properties of thermally treated mixtures containing MSWI fly ash and low-cost additives, Chemosphere 56, pp. 901-910.
  5. R. S. Hadal, and R. D. K. Misra, 2004: The influence of loading rate and concurrent microstructural evolution in micrometric talc-and wollastonite-reinforced high isotactic polypylene composites, Materials Science and Engineering, A374, pp. 374-389.
  6. Park, S. M. and Kim, H. G., 2006: Characteristics and Strength Evaluation of the Mixed Material of Fly ash from Municipal Solid Waste Incinerator and the Recycled Polypropylene, Environmental Engineering Research, Vol. 11, No. 5, pp. 257-265.
  7. Y. Li, Q. F. Fang, Z. G. Yi, K. Zheng, 2004: A study of internal frinction in polypropylene(PP) filled with nanometer-scale $CaCO_3$ particles, Materials Science and Engineering, A 370, pp. 268-272.
  8. 이종훈 등, 2003: 몬모릴로나이트로 강화된 폴리프로필렌나일론 나노복합재료의 난연특성 및 기계적 특성, Polymer(Korea), 27(6), pp. 576-582.
  9. 정정조, 김영규, 2004: 제지 폐수슬러지 소각재와 폐플라스틱 혼합체의 공학적특성, 대한토목학회논문집, 23(2B), pp. 171-175.
  10. Kae Long Lin, 2006: Feasibility study of using brick made from municipal solid waste incinerator fly ash slag, Journal of Hazardous Materials B137, pp. 1810-1816.
  11. 김혁중, 배주성, 2008: 도시쓰레기 소각비산재를 활용한 콘크리트의 특성연구, 한국폐기물학회지 25(4), pp. 339-345.
  12. 송준호, 배주성, 2006: 도시쓰레기 소각 바닥재를 시멘트 대체재로 활용한 콘크리트 특성에 관한 연구, 한국폐기물학회, 23(4), pp. 309-315.
  13. 정두영, 2008: 황토와 적황토는 다르다, 한국지반공학회지, Vol. 24, No. 3. pp. 54-56.
  14. 환경부, 2004: 폐기물 공정시험방법주해, 신광문화사.
  15. Bricka. R. M,. Holmes. T. T., and Clulinane. J., 1991: A Comparative Evaluation of Two Extraction Procedure : The TCLP and the EP., EPA/600/2-91/049, U. S. EPA, Cincinnati, Ohio.
  16. 김경남, 권재혁, 신대용, 2001: 석탄회-점토계의 세라믹스 벽돌제조, 한국폐기물학회지, 18(5), pp. 459-467.
  17. Boccaccini, A. R., Kopf, M. and Stumpfe, W., 1995: Glass- Ceramics From Filter Dusts From Waste Incinerators, Ceramics International, 21, pp. 231-235.