DOI QR코드

DOI QR Code

A Development of the Torso Pattern for Obese Middle-aged Women from 3D Virtual Garment Simulation

3D 가상착의 시스템에 의한 비만 중년여성의 토르소 원형설계에 관한 연구

  • Lim, Ji-Young (Dept.of Fashion Design & Business, College of Applied Science and Industry, Daejeon University)
  • 임지영 (대전대학교 응용산업대학 패션디자인.비즈니스학과)
  • Received : 2009.08.03
  • Accepted : 2009.08.19
  • Published : 2010.02.28

Abstract

The purpose of this study was to develop torso pattern of Middle-aged obese women by using the virtual twin and 3D virtual garment simulation system. The results were as follows; 1. By using 3D Virtual Garment Simulation, new torso pattern considered obese women was development. The basic numerical formula were as follows ; bust girth B/2+5, armhole depth B/6+5, front waist girth W/4+2+0.5, back waist girth W/4+1-0.5, front hip girth H/4+1+0.5, back hip girth H/4+2-0.5, chest width B/6+2.5, back width B/6+2.5 and back neck width B/20+2.5. 2. According to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern is appropriate for the obese women. Also, new torso pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

Acknowledgement

Supported by : 대전대학교

References

  1. 김혜경, 권숙희, 김순자, 박은주, 서추연, 이숙녀, 전은경, 조정미. (2001). 피복인간공학 실험 설계방법론. 서울: 교문사, p. 368.
  2. 남윤자, 이주현. (2008). 3차원 인체형상과 가상착의. 패션정보와 기술, 5, 41-53.
  3. 도월희. (2008). 3차원 가상 의상 모델링 시스템에 의한 모터사이클 재킷의 착의평가. 한국디자인문화학회, 14(1), 105-115.
  4. 박창규. (2004). 의류.패션산업에서의 3차원 및 디지털 응용기술의 현황. 패션정보와 기술, 1, 96-100.
  5. 백경자, 이정란, 김미성. (2009). 3차원 바디 스캐너를 활용한 가상착의에 관한 인식 조사 -업체 실무자 및 소비자를 대상으로-. 한국생활과학회지, 18(3), 719-727. https://doi.org/10.5934/KJHE.2009.18.3.719
  6. 서추연. (2006). 3D 패턴디자인 시스템에 의한 노년여성의 재킷바디스패턴 연구. 한국의류산업학회지, 8(5), 552-561.
  7. 서추연, 박순지. (2008). 노년 여성의 3D 입체형상 데이터를 활용한 상반신 원형 설계방법 연구. 한국의류학회지, 32(5), 846-858. https://doi.org/10.5850/JKSCT.2008.32.5.846
  8. 성옥진, 하희정. (2006). Plus-size 여성의 상반신 체형 연구. 복식, 56(2), 101-111.
  9. 윤미경, 남윤자, 최경미. (2007). 3차원 인체형상을 이용한 20대 여성의 하반신 전개패턴에 관한 연구. 한국의류학회지, 31(5), 692-704. https://doi.org/10.5850/JKSCT.2007.31.5.692
  10. 이현영, 이옥경, 홍경희. (2003). 3차원 측정 시스템을 이용한 유방부피 및 유저면적의 측정. 한국의류학회지, 27(2), 270-276.
  11. 임지영. (1998). 여중생의 하반신 체형분류에 따른 인대개발 및 슬랙스 원형설계에 관한 피복인간공하적 연구. 연세대학교대학원 박사학위논문.
  12. 임지영. (2005). 평면패턴의 제작과 활용. 서울: 교학연구사, p. 42.
  13. 조신현, 김미숙. (2008). 3차원 인체 측정을 이용한 40대 여성의 상반신 체형을 고려한 브래지어 패턴 개발. 복식문화연구, 16(3), 502-517.
  14. 정연희, 홍경희, 김시조. (2005). Triangle Simplification에 의한 3D 인체형상분할과 삼각조합법에 의한 2D 패턴 구성. 한국의류학회지, 29(9), 1359-1368.
  15. 정연희, 홍경희. (2006). 3D 스캔 데이터를 활용한 밀착 패턴원형 개발. 한국의류학회지, 30(1), 157-166.
  16. 홍성애, Daanen. (2004). TNO의 3D 관련연구와 의류산업에서의 활용방안. 패션정보와 기술, 1, 72-80.
  17. Bruner. (2004). Applications of 3D White Light Body Scanning. 패션정보와 기술, 1, 20-27.
  18. iVirds 3.0 DS Users' Guide.
  19. iVirds 3.0 PB Users' Guide.

Cited by

  1. Comparison on the Pants Fitting for Obese Women between 3D Virtual Garment and Real Garment vol.17, pp.2, 2013, https://doi.org/10.12940/jfb.2013.17.2.33
  2. Development of Torso Pattern for Underweight Female in their 20s~30s - Using Clo 3D program - vol.15, pp.6, 2013, https://doi.org/10.5805/SFTI.2013.15.6.963
  3. Development of Upper Bodice Pattern for the Late Elementary Obese- Schoolgirls - Using iVirds 3.0 PB and iVirds 3.0 DS program - vol.16, pp.6, 2014, https://doi.org/10.5805/SFTI.2014.16.6.921
  4. A Suggestion of the Size-designation for the Underweight Women's Tops in their 20s-30s vol.15, pp.3, 2013, https://doi.org/10.5805/SFTI.2013.15.3.423
  5. A Development of Hanbok Jeogori Pattern from Virtual Garment Simulation - With a Focus on Women in their 50s - vol.14, pp.4, 2012, https://doi.org/10.5805/KSCI.2012.14.4.607
  6. Men's Work Clothes Jumper Pattern-making and Its Appearance Evaluation through 3-D Clothing Simulation vol.16, pp.1, 2012, https://doi.org/10.12940/jfb.2012.16.1.103
  7. Development of lower bodice pattern for late-elementary obese-schoolgirls using 3D virtual garment simulation vol.23, pp.4, 2015, https://doi.org/10.7741/rjcc.2015.23.4.616
  8. A Study on Expressivity of Virtual Clothing made of 3D Apparel CAD System according to the Physical Properties of Fabric vol.17, pp.4, 2015, https://doi.org/10.5805/SFTI.2015.17.4.613