A Study on the Ease in Jacket Bodice Pattern for Abdomen-obese Middle-aged Men from Virtual Appearance Evaluation

가상착의 평가에 따른 복부비만 중년남성의 재킷 길 원형 여유량 설정

  • Lim, Ji-Young (Dept. of Fashion Design & Business, College of Applied Science and Industry, Daejeon University)
  • 임지영 (대전대학교 응용산업대학 패션디자인.비즈니스학과)
  • Received : 2010.05.11
  • Accepted : 2010.09.28
  • Published : 2010.12.31


The purpose of this study was to examine the appropriate surplus of clothing for a jacket bodice pattern of middle-aged obese men by using the 3D virtual twin and virtual garment simulation system. The results were as follows ; 1. BMI rate of middle-aged males was 28.13 which was equivalent to mild obesity, whereas WHR(W/H ratio from waist to hips) rate was near 1.00 which was highly dangerous against their obesity. In case of middle-aged obese men, the WHR was significantly higher than the entire middle-aged men's average and the section shape in which their thickness was relatively more than width. 2. As a result of appearances evaluation through virtual garment simulation, the cut-off amount of the side seam and the center back was regulated accordingly. Hereby, the final tolerance range was set up at 21.15 cm at the hips, so that the appearances became better and the bilateral distribution of the cross section and space length was formed symmetrically. Especially in case of increasing the cross amount of hems to produce a natural silhouette of the waist-to-hips parts, the ease of buttocks was judged to be moderate, but it turned out that a wavy cross section was made and the silhouette was not good. Thus it was found to be not good that the ease of the hips became excessively increased in proportion as circumference of waist and belly were increased in obesity. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.


  1. 강여선, 최혜선. (2005). 남성복 재킷의 선호 여유량과 맞음새에 관한 연구. 한국의류학회지, 29(1), 91-102.
  2. 김구자, 정명숙. (2001). 신사복의 패턴 그레이딩을 위한 체형분류 -44세에서 54세사이의 한국 성인남성을 대상으로-. 한국의류학회지, 25(6), 1069-1078.
  3. 김혜경, 권숙희, 김순자, 박은주, 서추연, 이숙녀, 전은경, 조정미. (2001). 피복인간공학 실험 설계방법론. 서울; 교문사, p. 368.
  4. 김혜수. (2001). 개별 주문 생산 실태와 수정패턴의 착의평가-중년 비만 남성 정장상의를 중심으로-. 가톨릭대학교 대학원 석사학위논문.
  5. 남윤자, 이형숙. (2005). 남성복 패턴메이킹. 서울; 교학연구사, pp. 93-97.
  6. 보건복지부. (2007). 국민건강영양조사 2007.
  7. 백경자, 이정란. (2001). 남성 정장 바지원형 설계에 관한 연구. 한국의류학회지, 25(8), 1524-1535.
  8. 산업자원부 기술표준원. (2005). 제5차 한국인 인체치수조사 사업보고서.
  9. 유경진, 이정란. (2002). 남성 정장 상의원형 설계에 관한 연구. 한국의류학회지, 26(1), 62-73.
  10. 이데일리. (2009. 9. 28). 똥보 남성들 여성보다 2배 이상 많아. 자료검색일 2009, 12. 31,
  11. 이선희, 서미아. (1997). 남성 기성복의 적합성에 대한 소비자 실태 조사. 한국생활과학연구, 25, 155-175.
  12. 이은진, 김인숙. (2003). 남성 재킷 원형 제도법 연구. 한국의류학회지, 27(8), 946-957.
  13. 이정임, 남윤자. (1998). 남성의 클래식재킷 원형에 관한 연구-20대 초반의 남성을 중심으로-. 한국의류학회지, 22(5), 644-663.
  14. 임지영. (2009). 복부비만 성인 남성의 하반신 비만유형별 치수체계 설정. 한국의류산업학회지, 11(6), 904-910.
  15. 임지영. (2010). 3D 가상착의 시스템에 의한 비만 중년여성의 토르소 원형설계에 관한 연구. 한국의류산업학회지, 12(1), 86-93.
  16. 정재은. (2002). 남성의 체형별 정장 길 원형 연구. 서울대학교 대학원 박사학위논문.

Cited by

  1. Analysis of Wearing Propensities, Wearing Comfort, Mobility of Movement, and 3D Shape for Advanced Baseball Leg Guards Design vol.39, pp.1, 2015,
  2. Analysis of Utilization of Virtual Try on Simulation and Consumers' Preference in Apparel Online Shopping vol.14, pp.1, 2012,
  3. Study on Preferred Style and Fit according to Stature Groups of Women aged 18 to 59 vol.14, pp.5, 2012,
  4. A Study on Based on the Possibility of Quantitative Analysis using Virtual Clothing Simulation according to Raglan Sleeve Pattern Types vol.21, pp.2, 2012,