DOI QR코드

DOI QR Code

The physicochemical characteristics of manufactured RPF by industrial combustibility waste

사업장 가연성폐기물로 제조된 RPF의 물리화학적 특성

  • Ryu, Young-Bok (Green Technology Service Center, Korea Institute of Industrial Technology) ;
  • Kim, Yang-Do (School of Materials Science and Engineering, Pusan National University) ;
  • Kang, Min-Su (Green Technology Service Center, Korea Institute of Industrial Technology) ;
  • Lee, Gang-Woo (Yoo Sung Company Limited) ;
  • Shon, Byung-Hyun (Department of Environmental Engineering, Hanseo University) ;
  • Lee, Man-Sig (Green Technology Service Center, Korea Institute of Industrial Technology)
  • Published : 2010.01.31

Abstract

Industrial combustible waste is very valuable source for refuse derived solid fuel since its heating value is usually over 3,000kcal/kg. Especially, synthetic high molecular compound which is high of productivity and heating value is used as raw material in many cases. Film type plastic has been widely used for producing RPF because their shaping is easy and they has high heating value. On the other hand, the possibility of various type of waste as a source for RPF in this study. It has been found that resin compound drived and tire derived solid fuel showed more than 6,000kcal/kg of heating value. But the heating value decreased by adding paper and wood waste.

Keywords

Heating value;Industrial Combustibility Waste;Derived Solid Fuels;6000kcal/kg

References

  1. 최병철, "2020년 폐기물 에너지 경제 효과 연간 4조원", 나라경제, pp. 18-19, 2008.
  2. 산업기술시험원, "환경성을 고려한 RDF 품질표준화연구", 산업자원부, 최종보고서, 2003.
  3. 한국기계연구원, "고분자폐기물 고형연료 제조 및 산업용연료 이용 기술개발에 관한 연구, 산업자원부, 최종보고서, 2004.
  4. Choi Y. S., Kwon Y. B., Kim B. K., Choi B. W. and Kim B. W., "The Development of a RDF Plant for Municipal Solid Wastes", J. Korean Solid Wastes Eng. Soc., Vol. 16, No. 6, pp. 682-691, 1999.
  5. 환경부, "경제살리기와 기후변화대응을 위한 폐기물 에너지화 종합대책", 2008.
  6. 한국산업폐기물처리공제조합, "산업폐기물 재활용의 문제점 고찰과 개선뱡향", 폐기물처리 News Letter, 2008.
  7. 이환광, "폐폴리에틸렌 필름의 재활용에 관한 연구", 한국산학기술학회, 제 9권, 제 1호, pp. 182-188, 2008. https://doi.org/10.5762/KAIS.2008.9.1.182
  8. 환경부, "자원의 절약과 재활용 촉진에 관한 법률 시행규칙", 2008.
  9. 환경부, "고형연료제품 품질 시험․분석방법", 환경부고시 제 2007-201호, 2008.
  10. 명소영, "목재의 급속열분해 공정에 의한 액상생성물 회수 특성 연구", 서울시립대 학위논문, 2005.
  11. 이종석, 곽현, 배성렬, "폐기물 고형연료의 연소특성에 관한 연구", Theories and Applications of Chem. Eng., Vol. 8, No. 2, pp. 4441-4444, 2002.
  12. 황재석, "폐기물처리개론", 동화기술교역, 2001.
  13. 한국기계연구원, "석탄유동층 보일러에서 폐플라스틱 고형연료의 혼소기술 개발", 산업자원부, 최종보고서, 2007.