DOI QR코드

DOI QR Code

A Study on Thermosonic Bonding Process and Its Reliability Evaluation of Joints

열초음파 접합 공정과 접합부의 신뢰성 평가에 관한 연구

  • Published : 2009.08.01

Abstract

In this thesis, lateral thermosonic bonding with ACFs was investigated as a process to make high reliability joints for FPD fabrication. Conditions for thermosonic and thermocompression bonding with ACFs were determined and used to make specimens in a driving test jig for testing of bond reliability by thermal shock. The results showed that thermosonic bonding temperature of $199\;^{\circ}C$ and bonding time of 1s produced bonds with good reliability. Additionally, thermosonic bonding temperature and time were reduced and thermal shock test results compared to this proposed curing condition. It is concluded that theromosonic bonding with ACFs can be effectively applied to reduce bonding temperature and time compared with that of thermocompression bonding.

References

  1. T. Chung and G. Haskell, 'Trends in microelectronics packaging and inter- connection, semiconductor electronics', Proc. ICSE, p. A1, 1996.
  2. S. Y. Kim, T. S. Oh, W. J. Lee, and Y. H. Kim, 'Low temperature and ultra fine pitch joints using non-conductive adhesives for flip chip technology', Proc. ICEPT, p. 414, 2006
  3. 신영의, 김경섭, 김헌의, 류기원, 장의구, '스탬핑 리드프레임의 전해 연마 가공조건에 관한 연구', 전기전자재료학회논문지, 13권, 12호, p. 983, 2000
  4. W. S. Kwon, K. W. Jang, and K. W. Paik, 'High reliable nonconductive adhesives for flip chip interconnections', Proceedings of International Symposium on Electronic Materials and Packaging, p. 34, 2001
  5. L. K. Teha, E. Anto, C. C. Wong, S. G. Mhaisalkar, E. H. Wong, P. S. Teo, and Z. Chen, 'Development and reliability of non- conductive adhesive flip chip packages', Thin Solid Films, Vol. 462, p. 446, 2004 https://doi.org/10.1016/j.tsf.2004.05.077
  6. J. H. Zhang and Y. C. Chan, 'Research on the contact resistance, reliability and degradation mechanisms of ACF inter- connection for flip chip on flex applications', Journal of Electronic Materials, Vol. 32, No. 42, p. 228, 2003 https://doi.org/10.1007/s11664-003-0214-z
  7. K. Matsuda and I. Watanabe, 'Interconnection technologies of anisotropic conductive films and their application to flexible electronics', Proceeding of HDP, 2007
  8. H. Kristiansen and J. Liu, 'Overview of conductive adhesive interconnection technol- ogies for LCD's', IEEE Transactions on Components Packaging and Manufacturing Technology Part A, Vol. 21, No. 2, p. 208, 1998 https://doi.org/10.1109/95.705466
  9. 박진석, 조일제, 신영의, '평판디스플레이를 위한 열압착법을 이용한 이방성 도전성 필름 접합', 전기전자재료학회논문지, 22권, 3호, p. 199, 2009 https://doi.org/10.4313/JKEM.2009.22.3.199
  10. K. N. Chiang, C. W. Chang, and C. T. Lin, 'Process modeling and thermal/mechanical behavior of ACA/ACF type flip-chip packages', Journal of electronic packaging, Vol. 123, p. 331, 2001 https://doi.org/10.1115/1.1389847
  11. I. Watanabe, 'Packaging technologies using anisotropic conductive adhesive films in FPDs', IDW’01proceedings, p. 553, 2001
  12. L. K. Teh, C. C. Wong, S. Mhaisalkar, K. Ong, P. S. Teo, and E. H. Wong, 'Charac- terization of nonconductive adhesives for flip-chip interconnection', Journal of Electronic Materials, Vol. 33, No. 4, p. 271, 2004 https://doi.org/10.1007/s11664-004-0132-8
  13. S. J. Hu, S. J. Lim, R. K. S. Sow, and G. Y. Sow, 'Gold wire weakening in the thermosonic bonding fo the first bond', IEEE transac- tionson components packaging and manufac- turing technology, Vol. 18, No. 1, p. 230, 1995 https://doi.org/10.1109/95.370760
  14. L. K. Teh, C. C. Wong, S. Mhaisalkar, K. Ong, P. S. Teo, and E. H. Wong, 'Charac- terization of nonconductive adhesives for flip-chip interconnection', Journal of Electronic Materials, Vol. 33, No. 4, p. 271, 2004 https://doi.org/10.1007/s11664-004-0132-8