DOI QR코드

DOI QR Code

Theoretical analysis of Y-shape bridge and application

  • Lu, Peng-Zhen (School of Civil Engineering, Southwest Jiaotong University) ;
  • Zhang, Jun-Ping (School of Civil Engineering of Guangzhou University) ;
  • Zhao, Ren-Da (School of Civil Engineering, Southwest Jiaotong University) ;
  • Huang, Hai-Yun (School of Civil Engineering of Guangzhou University)
  • Received : 2007.01.05
  • Accepted : 2008.12.04
  • Published : 2009.01.30

Abstract

Mechanic behavior of Y-shape thin-walled box girder bridge structure is complex, so one can not exactly hold the mechanical behavior of the Y-shape thin-walled box girder bridge structure through general calculation theory and analytical method. To hold the mechanical behavior better, based on elementary beam theory, by increasing the degree of freedom analytical method, taking account of restrained torsiondistortion angledistortion warp and shearing lag effect at the same time, authors obtain a thin-walled box beam analytical element of 10 degrees of freedom of every node, derive stiffness matrix of the element, and code a finite element procedure. In addition, authors combine the obtained procedure with spatial grillage analytical method, meanwhile, they build a new analytical method that is the spatial thin-walled box girder element grillage analysis method. In order to validate the precision of the obtained analysis method, authors analyze a type Y-shape thin-walled box girder bridge structure according to the elementary beam theory analytical method, the shell theory analytical method and the spatial thin-walled box girder element grillage analysis method respectively. At last, authors test a type Y-shape thin-walled box girder bridge structure. Comparisons of the results of theory analysis with the experimental text show that the spatial thin-walled box girder element grillage analysis method is simple and exact. The research results are helpful for the knowledge of the mechanics property of these Y-shape thin-walled box girder bridge structures.

References

  1. Ding, H.S. and Shao, R.G. (1996), 'Analysis of plan abnormity bridge', The Twelfth China Bridge Science Conference
  2. Hambly, E.C. (1982), 'Bridge super structural capability', Beijing: China Communication Press
  3. Hao, W.H. (2005), 'ANSYS civil engineering application example', Beijing, China Water Electricity Press
  4. Huang, H.Y. (2002), 'Y-shape bridge mechanic analysis take account of constrained torsion, distortion effect', Guangzhou: Huanan Science and Technology University
  5. Huang, J.Y. (1998), 'Turn back analysis of thin-walled structure', Beijing, China Railway Press
  6. Huang, J.Y. and Xie, X. (1994), 'Stiffness method of thin-walled curve pole structure analysis', J. Civil Eng., 5, 3-19
  7. Huang, J.Y. and Xie, X. (2000), 'Structure theory and calculation method of the viaduct bridge', Beijing, Science Press
  8. Kim, N.I., Fu, C.C. and Kim, M.Y. (2007), 'Stiffness matrices for exural-torsional/lateral buckling and vibration analysis of thin-walled beam', J. Sound Vib., 299, 739-756 https://doi.org/10.1016/j.jsv.2006.06.062
  9. Li, P. and Cong, Y.S. (1996), 'Box beam bridge design of Y-shape compose structure', High-way, 11, 29-31
  10. Luo, Q.Z., Tang, J., Li, Q.S., Liu, G.D. and Wu, J.R. (2004), 'Membrane forces acting on thin-walled box girders considering shear lag effect', Thin Wall. Struct., 42, 741-757 https://doi.org/10.1016/j.tws.2003.12.009
  11. Mira Mitra, S., Gopalakrishnan, M. and Seetharama Bhat. (2004), 'A new super convergent thin walled composite beam element for analysis of box beam structures', Int. J. Solids Struct., 41, 1491-1518 https://doi.org/10.1016/j.ijsolstr.2003.10.024
  12. Morreu, P.J.B., Riddington, J.R., Ali, F.A. and Hamid, H.A. (1996), 'Influence of Joint Detail on the Flexural/Torsional Interaction of Thin-Walled Structures', Thin Wall. Struct., 24, 97-111 https://doi.org/10.1016/0263-8231(95)00048-8
  13. Nie, Y.Z. (2000), 'Analysis of elastic thin-walled beam bridge', Beijing: China Communication Press
  14. O'Briven, E.J. and Keogh, D.L. (1998), 'Up stand finite element analysis of slab ridges', Comput. Struct., 69, 671-683 https://doi.org/10.1016/S0045-7949(98)00148-5
  15. Thuc Phuong Vo and Lee, J.H. (2006), 'Flexural-torsional behavior of thin-walled closed-section composite box beams', Eng. Struct., 29(8), 1774-1782
  16. Wu, S.X., Chen, H.P. and Huang, J.Y. (1996), 'Box girder bridge analysis with irregular arbitrary play geometry', J. Ninbo University, 3, 126-134
  17. Wu, Y.P., Yu, S.S., Shi, C.H., Li, J.J., Lai, Y.M. and Zhu, Y.L. (2004), 'Ultimate load analysis of thin-walled box beams considering shear lag effect', Thin Wall. Struct., 42, 1199-1210 https://doi.org/10.1016/j.tws.2004.03.013
  18. Yaping Wu, Yuanming Lai, Xuefu Zhang and Yuanlin Zhu. (2004), 'A finite beam element for analyzing shear lag and shear deformation effects in composite-laminated box girders', Comput. Struct., 82, 763-771 https://doi.org/10.1016/j.compstruc.2004.02.007
  19. Zhang, S.D., Deng, X.H. and Wang, W.Z. (1998), 'Thin-walled box beam shear lag effect', Beijing, China Communication Press