Ti-42.5at.%Ni-10at.%Cu합금의 형상기억특성에 관한 연구

A Study on the Shape Memory Characteristic Behaviors of Ti-42.5at%Ni-10at.% Cu Alloys

  • 우흥식 (동국대학교 안전환경시스템공학과) ;
  • 박용규 (동국대학교 대학원 안전환경시스템공학과)
  • Woo, Heung-Sik (Department of Safety Environmental System Engineering, Dongguk University) ;
  • Park, Yong-Gyu (Department of Safety Environmental System Engineering, graduate School of Dongguk University)
  • 발행 : 2009.02.28


Shape memory recoverable stress and strain of Ti-42.5at%Ni-10at%Cu alloys were measured by means of constant temperature tensile tests. The alloys' transformation behavior is B2 - B19 by DSC result. The strain by tensile stress were perfectly recovered by heating at any testing conditions but shape memory recoverable stress increased to 66MPa and then slightly decreased. Transformation temperatures from thermal cycling under constant uniaxial applied tensile loads linearly increased by increasing tensile load and their thermal hysteresis are about 110K and their maximum recoverable strain is 6.5% at 100MPa condition.


  1. K. Otsuka, and C. Wayman, 'Shape Memory Materials', Cambridge University Press, pp. 27-45, 1988
  2. 형상기억합금개발위원회 역, ‘형상기억합금과 그 사용방법’, 기전연구사, pp. 67-275,1991
  3. 박성범, ‘Ti-Ni계 형상기억합금의 변태거동에 미치는 시효처리의 영향’,동국대학교 대학원, 석사학위 청구논문, 2003
  4. J. Khalil Allafi, X. Ren, and G. Eggeler, 'The Mechanism of Multistage Martensitic Transformation in Aged Ni-rich NiTi Shape Memory Alloys', Acta Mater. Vol. 50, pp. 793-803,2002 https://doi.org/10.1016/S1359-6454(01)00385-8
  5. K. Otsuka, and C. Wayman, 'Shape Memory Materials', Cambridge University Press, pp. 40-44, 1988
  6. R. F. Hamilton, H .. Sehitoglu, Y.Chumlyakov, and H. J. Maier, 'Stress Dependence of the Hysteresis in Single Crystal NiTi Alloys', Acta Materialia, Vol. 52, pp. 3384-3402, 2004
  7. L.Batailard, J. E. Bidaux, and R. Gotthardt., 'Interaction between Microstructure and Multi-step Transformation in Binary NiTi Alloys Using in-situ Transformation Behavior of Ti-50.9at.%Ni', Material Science and Engineering A, Vol. 360, pp. 350-355,2003 https://doi.org/10.1016/S0921-5093(03)00443-X
  8. 김성진, 우흥식, 박성범, 'Ti-50.4at.%Ni합금의 변태거동에 미치는 시효처리의 영향(II)', 한국안전학회지, 제20권, 3호, pp. 27-33,2005
  9. K. Otsuka, and C. Wayman, 'Shape Memory Materials', Cambridge University Press, pp. 73-75, 1988
  10. P. Wollants, M. De Bonet, and J. R. Roos, 'On the Stress-dependence of the Latent Heat of Transformation as Related to the Efficiency of a Work Performing Cycle of a Memory Engine', Scripta Metall., Vol. 14,pp. 1217-1223, 1980 https://doi.org/10.1016/0036-9748(80)90260-4
  11. Wagoner Johnson, A., R. F. Hamilton, H. Sehitolu, G . Baillas, H. J. Maier, Y. I. Chumlyakov, and H. S. Woo, 'Analysis of Multistep Transformations in Single Crystal NiTi', Met. and Materials Trans., 36A, No.4, pp. 919-928,2005 https://doi.org/10.1007/s11661-005-0286-x