DOI QR코드

DOI QR Code

A Study on the Ceramic Body and Art Glaze by Using Coal Ash

도예용 소지 및 유에 석탄재 적용 연구

  • Ri, Se-W (Department of Materials Science & Engineering, Myongji University) ;
  • Park, Sung (Department of Materials Science & Engineering, Myongji University) ;
  • Chung, Yun-Joong (Department of Materials Science & Engineering, Myongji University)
  • 이세우 (명지대학교 신소재공학과) ;
  • 박성 (명지대학교 신소재공학과) ;
  • 정윤중 (명지대학교 신소재공학과)
  • Published : 2009.11.30

Abstract

This study is on the application of ceramic body and art glaze by using coal ash according to each wt%. Body color was turned red and dark as increasing coal ash contents in the body and art glaze because of the effect of noncombustible carbon in $Fe_2O_3$ and coal ash. Not only pore and black core were generated but also absorptance and shrinkage were increased as increasing coal ash contents. The glaze of coal ash 20 wt% showed blue absorption band, turned red band as increasing coal ash contents, $Al_2O_3\;to\;SiO_2$ ratio got lower and became mat because glaze is estranged from $Al_2O_3\;to\;SiO_2$ mol ratio 1:10 of transparent glaze as increasing coal ash contents. Glaze showed unstable dissolving condition in the more coal ash contents.

References

  1. J. U. Lee, S. M. Lee, H. T. Kim, E. S. Choi, and Y. S. Lee, “Micro Structure and Mechanical Properties of the Sintered Kaolin Block with Fly Ashes,” J. Kor. Ceram. Soc., 39 [12] 1164-70 (2002) https://doi.org/10.4191/KCERS.2002.39.12.1164
  2. K. N. Kim, J. H. Kwon, and D. Y. Shin, “The Manufacturing of Fly Ash System Ceramics Bricks,” J. Kor. Solid Wastes Eng. Soc., 18 [5] 459-67 (2001)
  3. C. L. Verma, S. K. Handa, S. K. Jain, and R. K. Yadav “Techno - Commercial Perspective Study for Sintered Fly Ash Lightweight Aggregates in India,” India, Construction and Building Mat., 12 341-46 (1998) https://doi.org/10.1016/S0950-0618(98)00022-1
  4. J. O. Hong and S. G. Kang, “Characteristics of Sintered Bodies Made from the System of Paper Sludge Ash-FlyAsh-Clay,” J. Kor. Ceram. Soc., 38 [10] 908-13 (2001)
  5. C. N. R. Rao, Chemistry of Advanced Materials, pp. 179- 83, Blackwell Scientific Publications, London, 1993
  6. J. Mukerji, “Nitride Ceramics-A Brief Account of Work Done in CGCRI,” Key Engineering Materials, 56-57 107-20 (1991) https://doi.org/10.4028/www.scientific.net/KEM.56-57.107
  7. K. H. Shin and B. H. Lee, “Synthesis of $Fe_2O_3$ - CoO - $Cr_2O_3$ - $MnO_2$ Pigments and Coloring in Glazes,” J. Kor. Ceram. Soc., 44 [10] 554-61 (2007) https://doi.org/10.4191/KCERS.2007.44.1.554
  8. K. G. Lee, H. J. Lee, C. J. Park, D. W. Kim, Y. T. Kim, and S. B. Kim, “A Study on the Plasticity Enhancement of Coal Fry Ash-Clay Bodies,” J. Kor. Ceram. Soc., 33 [2] 135-42 (1996)
  9. K. Ramamurthy and K. I. Harikrishnan, “Influence of Binders on Properties of Sintered Fly Ash Aggregate,” India, Cement & Concrete Composites, 28 33-8 (2006) https://doi.org/10.1016/j.cemconcomp.2005.06.005
  10. Sunil Kumar, “A Perspective Study on Fly Ash Lime Gypsum Bricks and Hollow Blocks for Low Cost Housing Development,” India, Construction and Building Mat., 16 519-25 (2002) https://doi.org/10.1016/S0950-0618(02)00034-X
  11. M. Nisnevich, G. Sirotin, T. Schlesinger, and Y. Eshel, “Radiological Safety Aspects of Utilizing Coal Ashes for Production of Lightweight Concrete,” Israel, Fuel, 87 1610-16 (2008) https://doi.org/10.1016/j.fuel.2007.07.031
  12. M. Erol, S. Kkbayrak, and A. Ersoy-Meriboyu, “Characterization of Sintered Coal Fly Ashes,” Turkey, Fuel 87 1334-40 (2008) https://doi.org/10.1016/j.fuel.2007.07.002
  13. N. Degirmenci, A. Okucu, and A. Turabi, “Application of Phosphogypsum in Soil Stabilization,” Turkey, Building and Environment, 42 3393-98 (2007) https://doi.org/10.1016/j.buildenv.2006.08.010

Cited by

  1. Effect of Flux Materials on the Melting Characteristics of Ash Glaze vol.608, pp.1662-9795, 2014, https://doi.org/10.4028/www.scientific.net/KEM.608.21