A Study on the Burning Rate of Puzzle Mats

퍼즐매트의 연소속도에 관한 연구

  • Park, Hyung-Ju (Department of Fire Service Administration, Howon University)
  • 박형주 (호원대학교 소방행정학부)
  • Published : 2008.12.31

Abstract

The mass loss rate and heat release rate of puzzle mats were analysed using variable external irradiation level. Five samples of puzzle mat were tested in this study : Type A, B, C, D and E. Type A, B and C are all general grades whereas Type D and E are both Flame retardant grades. Incident heat fluxs of $25kW/m^2$, $35kW/m^2$, $50kW/m^2$ and $70kW/m^2$ were selected for these experiments. All samples were tested in the horizontal orientation and were wrapped in a single layer of aluminum foil. Each sample was nominally 20mm thick and 100mm square. The combustion heat and mass loss rate were carried out from Oxygen bomb calorimeter and mass loss calorimeter according to ISO 5660-1 respectively. Heat release rates were calculated using the equation ${\dot{Q}}=A_f{\dot{m}}"_X{\Delta}H_c=0.75A_f{\dot{m}}"{\Delta}H_c$. where $A_f$ is the horizontal burning area of the sample, $\dot{m}"$ is mass loss rate per unit area, ${\Delta}H_c$ is complete heat of combustion and 0.75 is combustion efficiency.

Keywords

mass loss rate;heat release rate;puzzle mats;combustion heat;radiation heat flux

References

  1. 이봉우 외 8, "실내장식물 등 화재유해성 평가시험 용역", 소방방재청, 2006
  2. Nae-Woo Lee, Nam-Seok Kim, Byoung-Soo Moon, "A Study on Thermal Characteristics on Polymeric Floorings", Journal of the KOSOS, Vol. 21, No. 6, pp. 38-45, 2006
  3. 최금란, "건축내장재의 화재 안전성 평가에 관한 연구", 한국소방검정공사, 2006년도 소방검정기술기준 선진화 사업 연구과제 발표집, pp. 1-51, 2006
  4. ISO 5660-1, "Reaction to fire tests - Heat release, smoke production and mass loss rate - Part 1 : Heat release rete(cone calorimeter method)", International Standard, pp. 15-16, 2002
  5. J. G. Quintiere, B. Karlsson, "Enclosure Fire Dynamics", CRC Press LLC, Chapter 3, pp. 28-32, 2000
  6. Young-Kun Kong, Doo-Hyung Lee, "A Study on Ignitability and Heat Release Rate Characteristics of Rigid Polyurethane Foam", T. of Korean Institute of Fire Sci. & Eng., Vol. 17, No. 4, pp. 117-123, 2003
  7. Keun-Won Lee, Kwan-Eung Kim, Doo-Hyung Lee, "Combustion Characteristics of Fiber Reinforced Plastic by Cone Calorimeter", T. of Korean Institute of Fire Sci. & Eng., Vol. 18, No. 2, pp. 68-72, 2004
  8. Seong-Dong Kang, Chang-Woo Lee, Seong-Ho Hyun, Myung-O Yoon, "The Experimental Study on the Toxic Gases Released from the Service Industry Buildings", Vol. 16, No. 2, pp. 14-21, 2002
  9. 이봉우, "건축용바닥재의 화재안전성 평가에 관한 연구", 2006년도 소방검정기술기준 선진화 사업 연구과제 발표집, 한국소방검정공사, pp. 1-38, 2006
  10. Keun-Won Lee, Kwan-Eung Kim, "Fire Characteristics of Plastic Insulating Materials from Cone Calorimeter Test", T. of Korean Institute of Fire Sci. & Eng., Vol. 17, No. 1, pp. 76-83, 2003