Material Degradation in KS D 3503 SS400 Rolled Steel at $179^{\circ}C$

KS D 3503 SS400 압연강 $179^{\circ}C$에서의 재질열화 연구

  • Baek, Un-Bong (Safety Metrology Group, Korea Research Institute of Standards and Science) ;
  • Park, Jong-Seo (Safety Metrology Group, Korea Research Institute of Standards and Science) ;
  • Nahm, Seung-Hoon (Safety Metrology Group, Korea Research Institute of Standards and Science)
  • 백운봉 (한국표준과학연구원 안전그룹) ;
  • 박종서 (한국표준과학연구원 안전그룹) ;
  • 남승훈 (한국표준과학연구원 안전그룹)
  • Published : 2006.08.31

Abstract

In spite of frequent defect in industrial boilers, life assessment or diagnostic method for them has not been actively studied. In this research, SS400 carbon steel used in industrial boilers is simulated with artificial aging heat treatment. To do qualitative life assessment, differences in micro-structures and hardness of SS400 by the degradation time are studied. In addition, variation in material properties by aging was observed with the tensile test at room temperature and $179^{\circ}C$ and changes in ductile to brittle transition temperature was observed with the charpy impact test performed at several test temperature.

References

  1. '보일러 열화도 평가를 위한 표준금속 조직개발', KRISS/IR-2004-086 연구보고서, 2004
  2. '보일러 및 압력용기 안전사고 사례', 에너지 관리공단, p. 3-7, 2001
  3. L. H. Toft, and R. A. Mardsen, 'The structure and properties of 1%Cr0.5%Mo steel after service in CEGB power stations', in Conference on structural processes in creep, JISI/JIM, London, p. 275, 1963
  4. '노후 취약설비 정밀진단 및 수명평가', KRISS93-171-IR 연구보고서, 1993
  5. E. R. Parker, 'Brittle Behavior of Engineering Structures', John Wiley & Sons, New York, 1957
  6. R. Viswanathan, 'Damage Mechanisms and Life Assessment of High-Temperature Components', ASM, 1989
  7. W. D. Biggs, 'The Brittle Fracture of Steel', Pitman, New York, 1960
  8. A. D. Batte, and D. J. Gooch, 'Metallurgical Aspects of Remanent Life Assessment of high Temperature Rotor Forging', in life assessment and Improvement of Turbo generator Rotors for Fossil plants, R. Viswanathan, Ed., pergamon Press, New York, p. 3.79-3.100, 1985
  9. Abdel-Lafit, A. M., Corbett, J. M., and Taplin, D. M. R., 'Analysis of Carbides Formed During Accelerated Ageing of 2.25Cr-1Mo Steel', Metal Science, 16, 90 -96, 1982 https://doi.org/10.1179/030634582790427181
  10. 박종서, 이해무, 백운봉, '고온설비 수명평가를 위한표면 복제 절차의 표준화', 기계학회 논문집 A권, 제24권, 제9호, pp. 2381 -2386, 2000