A Study on the Marking Efficiency of Basic Slacks

바지의 Marking 효율성에 관한 연구

  • Received : 2006.01.01
  • Published : 2006.06.30

Abstract

This study intended to compare and analyze marking efficiencies of basic slacks, based on different cloth and production conditions, the width of cloth, the number of marking pieces and the direction for marking deployment and proposed an efficient marking method. The results were as follows. On the whole, the marking efficiencies increased with increasing cloth widths. In the case of small number of marking pieces, the efficiency increased with increasing cloth widths, while, for large number of marking pieces, there was no differences in the efficiency with the cloth widths. From the result of the comparison of the marking efficiencies with the number of marking pieces, it was shown that, in the case of small cloth width, the efficiency increased considerably with increasing number of marking pieces, while, in the case of large cloth width over two markers, there was no distinct effect of the number of markers on the marking efficiency. Thought there were some differences of the marking efficiencies with the marker directions, bi-direction marker was the most efficient marker, followed by one-direction for each size marker and one-direction marker.

Keywords

CAD system;marker;marking efficiency;required amount of cloth;basic slacks

References

  1. 김준범 (1999) 기성복 디자인의 개발에서 Marking에 따른 차이가 원 자재 소요량과 Maker 효율에 미치는 영향에 관한 연구, 한국의 류학회지, 23(1), 120-127
  2. 김혜경 . 조은정 (2004) 원피스 드레스 패턴 마킹의 효율성에 관한 연구. 복식, 54(1), 97-108
  3. 유경옥 (1995) 어패럴 CAD 시스템을 활용한 플레어 스커트 연구, 동덕여자대학교 대학원 석사학위논문
  4. 조은정 (1996) 어패럴 CAD 시스템을 이용한 Marking의 효율성에 관한 연구: 블라우스 패턴을 중심으로. 동덕여자대학교 대학원 석사학위논문
  5. 최윤선(2001) 여성복 그레이딩의 연령별 비교에 관한 연구. 동덕여자 대학교 대학원 석사학위논문
  6. 서은숙 (2003} 패턴제작 및 마킹의 CAD시스템 활성화에 관한 연구: 스커트를 중심으로. 덕성여자대학교 대학원 석사학위논문
  7. 오선희 (1994) '봉제과학과 생산관리'. 경춘사, 서울, p.51
  8. 박길순 . 류신아 (2000) 의복생산시 마킹(Marking)공정에 관한 연구, 복식문화연구, 8(1), 53-64