A Study on Expedite Heat Transfer in Packed Bed of Hydration Calcined Dolomite for Chemical Heat Pump

소성 Dolomite 수화물 화학열펌프의 고체반응층 전열촉진 연구

  • Kim, Jong-Shik (Department of Chemical Engineering, Keimyung University) ;
  • Lee, Han-Gyu (Department of Chemical Engineering, Keimyung University) ;
  • Park, Young-Hae (Department of Chemical Industry, Yeungnam College of Science & Technology)
  • 김종식 (계명대학교 화학공학과) ;
  • 이한규 (계명대학교 화학공학과) ;
  • 박영해 (영남이공대학 물질향장계열)
  • Received : 2005.03.08
  • Accepted : 2005.03.23
  • Published : 2005.06.10

Abstract

The reaction of hydration proceeded at the same time the vapor was introduced into the reactor that was filled with calcined dolomite. It has shown that the temperature has begun to fall from the bottom of reactor after increase of temperature by the heat of hydration reaction. The reaction initiated at the pipe wall and the heat was transfer to the center of block between the fins. The results show that the use of copper fin in the reactor reducted the hydration reaction time by half when compared to the case without using the fins.

References

  1. W. Wongsuwan, S. Kumar, P. Neveu, and Meunier, Applied Thermal Engineering, 21, 1489 (2001) https://doi.org/10.1016/S1359-4311(01)00022-9
  2. O. K. Kwon, J. H. Yun, J. W. Kim, J. Lee, and Y. Kato, 설비공학논문집, 16-1, 34 (2004)
  3. S. Fujimoto, E. Bilgen, and H. Ogura, Energy Conversion and Management J., 43, 947 (2002) https://doi.org/10.1016/S0196-8904(01)00081-4
  4. H. Ogura, T. Yamamoto, and H. Kage, Energy, 28, 1479 (2003) https://doi.org/10.1016/S0360-5442(03)00119-1
  5. H. Ogura, T. Yamamoto, H. Kage, Y, Matsuno, and A. Mujumdar, Chemical Engineering J., 86, 3 (2002) https://doi.org/10.1016/S1385-8947(01)00265-0
  6. S. Fujimoto, E. Bilgen, and H. Ogura, Energy, An International J., 2, 6 (2002)
  7. H. Ogura, S. Abliz, and H. Kage, Fuel Processing Technology, 85, 1259 (2004) https://doi.org/10.1016/j.fuproc.2003.10.020
  8. Y. Kato, D, Saku, N. Harada, and Y. Yoshizawa, Applied Thermal Engineering, 32, 563 (1998)
  9. Y. Kato, N. Harada, and Y. Yoshizawa, Applied Thermal Engineering, 19, 239 (1999) https://doi.org/10.1016/S1359-4311(98)00049-0
  10. Y. Kato, M. Yamada, T. Kanie, and Y. Yoshizawa, Nucler Engineerng and Design, 210, 1 (2001) https://doi.org/10.1016/S0029-5493(01)00421-6
  11. Y. Kato, F. Takahashi, A. Watanabe, and Y. Yoshizawa, Applied Thermal Engineering, 21, 239 (2001)
  12. Y. H. Park and J. S. Kim, J. the Korean Sola Energy Society, 22-1, 9 (2002)
  13. H. Matsuda, T. Ishizu, S. K. Lee, and M. Hasatani, J. Kagaku Kogaku Ronbunshu, 11, 542 (1985) https://doi.org/10.1252/kakoronbunshu.11.542