The Preparation of Phosphor Screen for Video Phone Tube by Screen Printing Method

Screen Printing법에 의한 Video Phone Tube용 형광막 제조

  • Lee Mi-Young (Division of Image and Information, Pukyong National University) ;
  • Lee Jong-Wook (Division of Image and Information, Pukyong National University) ;
  • Kim Young-Bae (Division of Image and Information, Pukyong National University) ;
  • Nam Su-Yong (Division of Image and Information, Pukyong National University) ;
  • Lee Sang-Nam (Division of Image and Information, Pukyong National University) ;
  • Moon Myung-Jun (Division of Applied Chemical Engineering, Pukyong National University)
  • 이미영 (부경대학교 화상정보공학부) ;
  • 이종욱 (부경대학교 화상정보공학부) ;
  • 김영배 (부경대학교 화상정보공학부) ;
  • 남수용 (부경대학교 화상정보공학부) ;
  • 이상남 (부경대학교 화상정보공학부) ;
  • 문명준 (부경대학교 응용화학공학부)
  • Published : 2005.08.01


The phosphor and ITO(Indium Tin Oxide) films for video phone tube (VPT) were simply prepared by the screen printing and thermal transfer methods. The increasing order of thermal firing of acrylic binder for phosphor and ITO was M6003 < M6664 < A/A 1919 < M500l < M670 1 and all mass of binders were perfectly decomposed at lower temperature than $400^{\circ}C.$ After thermal firing of phosphor paste, the residual of binder on the surface of phosphor could not be found by SEM. Aerosil as thickner provides the thixotropy property for phosphor paste but decrease the brightness of phosphor screen as residual after thermal firing. Since the thixotropy of M5001 binder without aerosil was shown and the storage modulus of phosphor paste by increasing the angular frequency was not nearly changed and the decrease of the storage modulus of phosphor paste by increasing the strain was remarkably shown. It was possible to prepare the phosphor paste which was predominant in the plate separation and the reproduction of pattern after the screen printing. Since the addition of dispersing agent to improve the printing process decreases the electrical conductivity and light transmission of ITa film, it could be found to be necessary the development of binder for phosphor paste that decreases the amount of dispersing agent possibly and does not use the aerosil as additive.


VPT;ITa;Phosphor;Screen Printing;Rheology


  1. 誠前田, 1985, 電子技術, フラットCRT, 27(5), 12-16
  2. Kenzi, Y and U. Tsutomu, 1987, テレビジョン 學會技術情報, Monochrome Flat CRT, 11(13), 31-35
  3. Hu, J., A. J. Snell and A. E. Owen, 1998, Constant current Forming in Cr/$P^*$ a-Si:H/V thin film device, J. Non-Crystalline Solids, 227(30), 1187-1191
  4. Day, N., 2004, GMP in pharmaceutical processing and its implications for centrifuges, Filtration and Separation, 41(2), 20-23
  5. Leung, W., 2004, Separation of dispersed suspension in rotating test tube, Separation and Purification Technology, 38, 99-119
  6. 남수용, 2003, 특수인쇄, 대한교과서(주), 213
  7. 日本國 特許廳, 公開特許公報, 特許1994-234508
  8. 日本國 特許廳, 公開特許公報, 特許1995-267416
  9. 日本國 特許廳, 公開特許公報, 特許1995-267417
  10. 日本國 特許廳, 公開特許公報, 特許1995-267418
  11. 日本國 特許廳, 公開特許公報, 特許1995-267419
  12. 日本國 特許廳, 公開特許公報, 特許1995-295672
  13. 日本國 特許廳, 公開特許公報, 特許1997-64133
  14. 南壽龍, 李賢哲, 大坪泰文, 2002,螢光体層のスク リーン印刷と熱轉寫による平面モノクロムCRTの 開發, 日本印刷學會誌, 39(6), 28-33
  15. Ozawa, L., 2002, Electron flow route at phosphor screen in CRTs, Materials Chemistry and Physics, 73, 144-150
  16. Ha, S. H., C. H. Chang, S. Y. Nam and S. H. Cho, 2001, Development of High-Definition VFD Anode Pattern using Watersaluble UV Curable Resin, 8th Soc. Infer. Display, 24-27
  17. 이종욱, 남수용, 김두훈, 2003, VFD용 형광체 paste의 레올로지 특성과 패턴제작, 한국인쇄학회 추계 학술발표회 초록, 135-143
  18. 민경재, 우진호, 남수용, 김광영, 2001, 스크린인쇄법에 의한 PDP 격벽형성 연구, 한국인쇄학회지, 19, 138-148