The ADR(Address During Reset) Driving Method for High-Speed Addressing in an AC-PDP

AC PDP에서 고속 어드레싱을 위한 ADR(Address During Reset) 구동 방식

  • 송근영 (인하대 공대 전기공학과) ;
  • 김근수 (인하대 공대 전기공학과) ;
  • 이석현 (인하대 공대 전기공학과)
  • Published : 2005.06.01

Abstract

In order to achieve high efficiency and low cost, new high-speed addressing method is suggested. This can be implemented by reducing the address discharge time lag through the priming effect. This paper suggests a new ADR(Address During Reset) driving method which provides priming particles by a separated driving method without adding auxiliary electrode or auxiliary discharge. The experimental results show an approximately 100ns reduction in the formative delay time of address discharge and a reduction in jitter of over 200ns. Also, due to enough time being available for reset, there was a reduction of about 29$\%$ in linht emitted during the reset period considerably.

Keywords

Plasma Display Panel;High-Speed Addressing;Driving Method

References

  1. Larry F. Weber, 'The Promise of Plasma Deisplay for HDTV', Society for Information Display(SID), vol 16, no. 12, pp 16-20, 2000
  2. J.Y. Yoo et al, 'High speed-Addressing for Single-Scan of AC PDP', SID 01, pp 798-801, 2001
  3. K.D. Cho et al, 'New Fast Addressing Waveform for XGA Grade AC Plasma Display Panel', Euro display 2002, pp 333-336, 2002